Rear Prop Shaft Lengths

[RRT]

HI guys
NOT a defender owner but have a D2 that I am fitting a 8HP to the TD5, it would appear that I have to move the LT230 back (unsure how much yet) but thought it would great to know the alternative length tail shafts that could be potentially used if necessary.

Does anyone have a list of such?

Regards

Arty

[RRT]

Been doing a bit of research, sure within all this I will find something!


Series 1:
86, 88, 107, 109 Front: 654mm / 23.812"
86 & 88 Rear: 554mm / 21.812"
107 & 109 Rear: 1087mm / 42.812"


Series 3:
4cyl Front - 604.8 mm / 23.812"
6cyl Front - 693.7 mm / 27.312"
88" Rear - 554.0 mm / 21.812"
109" 4cyl Rear - 1042.9 mm / 41.062"
109" 6cyl Rear - 955.7 mm / 37.625"



110 300TDi Commercial 1997:
Front: 635mm
Rear: 1100mm


Range Rover V8 4-speed Auto 1986:
Front: 610mm
Rear 890mm


Series 1 80"
rear - 40cm compressed, 45cm extended


989 110 rear propshaft.
1015mm to 1070mm


d5 110 w/ R380 & LT230
rear 1110mm,


Tdi Discovery
rear 887mm's long.
Also
Defender 200 front 685
Def 200 rr 667
Def 300 fr 637
Def 300 Rr 720

110 Puma
rear is 1070mm closed length.


200tdi 90:

fully extended: 27.75"
fully compressed: 25.5"


https://www.southwalesprops.co.uk/propshaft/vehicles/landrover/landrover_defender.htm
https://www.southwalesprops.co.uk/propshaft/vehicles/landrover/landrover_discovery_mk1.htm
https://www.southwalesprops.co.uk/propshaft/vehicles/landrover/landrover_discovery_mk2.htm


189306

https://www.devon4x4.com/off-road-store/drivetrain-and-axles/propshafts.html
https://www.ep90.com/propshafts-ujs.html

[discorevy]

I usually get them shortened, just picked one up today, 18mm shorter to suit a TD5 Disco with ZF 24 box and thicker rotoflex, my local engineers do a good job.

Is that not an option?

[AK83]

Balancing joint in Preston on Chiefly Drive, on the corner of Fink St.
Balancing Services.

I had the front prop in my RRC straightened and balanced by this mob. Did a good job.
Was, like, a gazillion years ago tho.

[RRT]

I usually get them shortened, just picked one up today, 18mm shorter to suit a TD5 Disco with ZF 24 box and thicker rotoflex, my local engineers do a good job.

Is that not an option?



Balancing joint in Preston on Chiefly Drive, on the corner of Fink St.
Balancing Services.

I had the front prop in my RRC straightened and balanced by this mob. Did a good job.
Was, like, a gazillion years ago tho.


Sure is an option, what sort of pricing and turnaround for this???

Have to make some custom pipes up for the cooler so it wont be a single day changeover but this of course means that if it is a quick turnaound of around a day. Can of course drive it as a front wheel drive for day or so...

[discorevy]

Sure is an option, what sort of pricing and turnaround for this???

Have to make some custom pipes up for the cooler so it wont be a single day changeover but this of course means that if it is a quick turnaound of around a day. Can of course drive it as a front wheel drive for day or so...

Was $160 / 2 days turnaround, but that depends on how busy they were.
You could also get one from a wrecker (late D1 will work as well) or use the other disco in your sig if they would take a while.