PDA

View Full Version : Mrs Hiline: Help Please



hiline
13th January 2008, 02:31 PM
Can anyone help me with this problem??

MY 97 HSE's new trick is to stall. I can go to the shops no problem then when I come out every time I start it it stalls. I can manage to get go with a lot of rev's but each time i have to turn or slow down it stops again. Now this doesn't happen every day just now and then.


What could be causing this any help would be appreciated.

Mr Hiline is of no help what so ever :angry::angry:

Thanks

Fiona

Blknight.aus
13th January 2008, 02:48 PM
Can anyone help me with this problem??

MY 97 HSE's new trick is to stall. I can go to the shops no problem then when I come out every time I start it it stalls. I can manage to get go with a lot of rev's but each time i have to turn or slow down it stops again. Now this doesn't happen every day just now and then.


What could be causing this any help would be appreciated.

Mr Hiline is of no help what so ever :angry::angry:

Thanks

Fiona

blocked/failed Idle bypass ports/steppermotor.

DEFENDERZOOK
13th January 2008, 03:03 PM
my reply too.......stepper motor......

rick130
13th January 2008, 03:11 PM
<snip>

Mr Hiline is of no help what so ever :angry::angry:

Thanks

Fiona


Is that just now, or mostly, Fiona ? :D ;)

DEFENDERZOOK
13th January 2008, 03:14 PM
if you want hiline to be of more help.......

just his car.......im sure yours would get fixed before you got as far as the driveway......

feral
13th January 2008, 05:58 PM
blocked/failed Idle bypass ports/steppermotor.



This has been done not so long ago ???

I seem to recall that Mr Hiline questioned this ages ago....:confused:

oh, hang on...now I get it :eek:

Jeez Hiline, you're slack. Pull your finger out :D:D:D

feral
13th January 2008, 06:10 PM
Mr Hiline has done well :angel:

December 2005...

http://www.aulro.com/afvb/technical-chatter/24395-p38-just-stops.html

Xavie
13th January 2008, 06:48 PM
Mr Hiline has done well :angel:

December 2005...

http://www.aulro.com/afvb/technical-chatter/24395-p38-just-stops.html

:Rolling::Rolling::Rolling:

Xavier

agrojnr
14th January 2008, 08:32 AM
My disco had the same problem (mine was the stepper motor)


Adam