View Full Version : Instrument Binnacle Removal Discovery 1995 series 1
Cool95
26th February 2008, 01:07 PM
There's an annoying buzz behind the instrument binnacle for the life of me I can't see any visable screws or clips to remove to take it off. I don't want to force it off don't want broken clips.
Thanks in advance
Utemad
26th February 2008, 01:34 PM
To get the surround off there are two screws above the steering column at the bottom of the surround. Remove these and thenthere are two clips on the top near the windscreen. Pulling forward should release those two easily.
As for the instrument cluster thingo itself there are a couple of screws in there. I've had it out but don't remember where the screws are exactly. Probably one in each corner.
ladas
26th February 2008, 01:46 PM
There's an annoying buzz behind the instrument binnacle for the life of me I can't see any visable screws or clips to remove to take it off. I don't want to force it off don't want broken clips.
Thanks in advance
See attached
..................but I would recommend that you buy the RAVE CD from the markets section, it has all this info in it, and they are not expensive..........
Plus the sales of these helps support this forum
Ladas
Cool95
27th February 2008, 06:17 AM
Thanks for the location of the screws and clips
Powered by vBulletin® Version 4.2.4 Copyright © 2026 vBulletin Solutions, Inc. All rights reserved.