Pto Winches

[banjo]

ok i have a thomas pto 8000lbs winch.can any one point me in the right place to get hold of a manual owner or maintance.i am going to make a new frame for mine for the S3 & while its out i thought i would give it a spit & polish,but dont want to just jump in & pull it all apart..thanx...

[weeds]

the manual was posted on here a while ago....do a quick search you should find

i think i have a pdf somewhere that i could email

[DeeJay]

I stripped one down a few years ago. Pretty simple to work on. I took the seals & bearings to bearing supplies and got newies.
I recommend moreys oil when you replace the oil, or similar.
Cheers,
David

[Grizzly_Adams]

hmmm can't seem to attach to the message.

Try doing a search on "Thomas" by me, should find the zip file.

EDIT: Here is the thread: http://www.aulro.com/afvb/technical-chatter/48704-thomas-pto-winches-3.html (http://www.aulro.com/afvb/../technical-chatter/48704-thomas-pto-winches-3.html)

[hodgo]

I stripped one down a few years ago. Pretty simple to work on. I took the seals & bearings to bearing supplies and got newies.
I recommend moreys oil when you replace the oil, or similar.
Cheers,
David


I had a 30,000 Lb winch on a float that I use to drive, It use to leak oil and had what sounded like a bearing noise in it when pulling a heavy load ( dead earth moving plant) I filled it with Morey's and about 2 uses later the leaks and the noise went.
Hodgo