Rear tyre wear on 130 Tray back.

[sumo]

Hi

Rotated the tyres around about 6mths ago, as the fronts were just starting to wear on the inside edge a bit, just noticed today they are still wearing the same way on the back:eek: , i would have thought on the rear they would even out across the tyre?, have i got something else going on?

Cheers Sumo:D

[bblaze]

from my experience, once a wear pattern develops it will continue even if put on the rear. I think it helps slow it down but you need to fix the front problem.
cheers
blaze

[rick130]

Mine do the same and the alignment is OK. It's a combination of (in my case) MT tyre, toe out and a driving/steering axle.
You'll have to pull them off the rim and swap to the other side to beat the wear and keep them rolling the same way, which is what i do.

[agrojnr]

What pressure are you running I always had mine above 45psi and had no problem

Adam

[camel_landy]

Had something similar on my 110. Ended up having to change the bearings in one of the front swivels as they had collapsed.

HTH

M

[sumo]

Usually running between 45- 50 psi.