part numbers

[incisor]

anyone know the LR part numbers for 85 county 4bd1-T with LT85

clutch plate
pressure plate
throw out bearing
pilot bush/bearing

front springs
rear springs
front shocks
rear shocks

2 prong fuel cap

i cant find them in anything i own...

[isuzurover]

anyone know the LR part numbers for 85 county 4bd1-T with LT85

clutch plate
pressure plate
throw out bearing
pilot bush/bearing

front springs
rear springs
front shocks
rear shocks

2 prong fuel cap

i cant find them in anything i own...

Don't have the PN's, but IME, most parts places will have listings for a Land Rover (county) 3.9 Diesel 5 speed.

No such thing as a factory 4BD1T county.

I have king springs in mine, I am happy with them. PNs are floating around here somewhere I think.

[incisor]

this thing has kings under it but they are way to stiff so i 'd say the are heavier than usual..

the clutch would be the same i would think (hope).

[isuzurover]

this thing has kings under it but they are way to stiff so i 'd say the are heavier than usual..

the clutch would be the same i would think (hope).

King springs make 2 different fronts for 110s. Standard height and 2" raised.

KRRS-02 and KRRR-02 respectively.

http://www.kingsprings.com/kings_master_catalogue.pdf

I have the 2" lifted srpings all round. I am happy with them. Front is a bit stiff, but mine is a touring vehicle, and by the time I bolt a winch on it will be fine.

[incisor]

will see if i can find a number on these things they look quite new so hopefully something is still there..

[mitch]

Fuel cap: http://www.aulro.com/afvb/technical-chatter/52547-whats-cap.html

Had me stumped, British offroad had no idea also. I guessed its a custom jobbie from the guy who did the conversion.

[Bearman]

Hi mate, I can help you with a few of these
5 Speed clutch plate......AYG3463 (thats the normal one-dont think they make a special one for the turbo motor)
Turbo motor pressure plate...8970317592
Throwout (same as 4 speed).AYG3339
Input shaft bush assembly....AYG320
Regards.......................................Bria n

[Bearman]

Found another one..2 lug fuel cap ....504655
regards....Brian

[MacFamily]

Not sure if this will help Dave but have a look anyway just found it on ebay..

Land Rover 110/Isuzu Diesel Genuine Clutch Kit - eBay, Other Car Parts, Accessories, Car Parts, Accessories, Cars, Bikes, Boats. (end time 03-Aug-08 20:32:12 AEST) (http://cgi.ebay.com.au/Land-Rover-110-Isuzu-Diesel-Genuine-Clutch-Kit_W0QQitemZ170244296139QQihZ007QQcategoryZ6763QQ ssPageNameZWDVWQQrdZ1QQcmdZViewItem).
Azza

[Bearman]

That one on EBAY is a 4 speed clutch kit. The clutch plate is for a 4 speed with turbo motor AYG3616 and the pressure plate is for a non turbo motor-Part No.5312200240.Throwout bearing is standard....Regards..Brian

[p38arover]

I'll check my catalogues later tonight (after Top Gear :D )

[incisor]

Found another one..2 lug fuel cap ....504655
regards....Brian

that isnt it unfortunetly...

see what the weekend brings when i am off to start stripping the replacement body parts off the donor vehicle all going well...

[incisor]

i can feel a minefield coming on :P

different clutch plates for 4 or 5 speed (spline on input shaft?)

different pressure plates for na and turbo (clamping pressure?)

this could be fun :P

[Bearman]

Did you get my pm with the part numbers for clutch and pressure plates?. If they are genuine p/plates they should have the numbers on them-I dont know about aftermarket ones, I wouldnt touch them.Regards...Brian...That number for the 2 lug fuel cap came from my 1968 Rover parts catalogue. It lists a 2 and 3 pin cap...!

[p38arover]

Sorry, my info is for the LT95

[incisor]

Did you get my pm with the part numbers for clutch and pressure plates?. If they are genuine p/plates they should have the numbers on them-I dont know about aftermarket ones, I wouldnt touch them.Regards...Brian...That number for the 2 lug fuel cap came from my 1968 Rover parts catalogue. It lists a 2 and 3 pin cap...!

thanks...

no pm, only the info you posted above

the 2 lug number is for the one with external pins on the fuel filler neck, this one has internal pins and looks like it is not lr after a bit of searching ...

[mitch]

Did you get my pm with the part numbers for clutch and pressure plates?. If they are genuine p/plates they should have the numbers on them-I dont know about aftermarket ones, I wouldnt touch them.Regards...Brian...That number for the 2 lug fuel cap came from my 1968 Rover parts catalogue. It lists a 2 and 3 pin cap...!

The 2 pin cap on this county clamps on the inside. The V8 rangie one clamps on the outside. Its a mystery :D

[Bearman]

Thats the part number I have quote for the Landy 2 pin cap that clamps on the inside.My County still has it.

[Bearman]

I can help with some of those part numbers:
5 speed Isuzu clutch plate..........................AYG3463
Isuzu turbo motor pressure plate..................8970317592
Throwout bearing......................................AYG33 39
Input shaft bush assembly...........................AYG320
The N/A 4BD1 has a different pressure plate. That one on EBAY is one matched up with a turbo clutch plate.Regards....Brian:)

[incisor]

the fuel cap on this one is the same as one i saw at tamborine on saturday so it must be a std fitting all be it not a common one it seems...

[Lotz-A-Landies]

Does anyone know the part numbers for the LT95 hi ratio gearsets as fitted to the Isuzu Stage 1's and Perenties?

Or where to get them?

Diana

[incisor]

they are on ebay for about 400 odd dollars

[Bearman]

Hi Diana,
If you have the standard intermediate shaft in your transfer case, the set on ebay will fit. Have a look at item 310051714827 in the buy it now section of land rover, seller is Landy Spares SA. The army perenties have a totally different intermediate shaft comprised of about 20 different bits mounted on tapered roller bearings and are quite expensive to buy new (around $3000). I have the part numbers for all the pieces if you want them. If you are lucky you might pick one up cheaper second hand. Regards....Brian