View Full Version : Replacment footwell
Randylandy
9th October 2008, 04:33 PM
After having a good poke about have found the passengers foot well has a bit of rot going on where the inner mud sheild bolts on. Just looking through a landy mag I saw that I can get a new foot well. Anyone know if that is just the alloy pannel in front of the seat box or the steel part that rivets on to the firewall? Does anyone in oz stock them or will it be ex UK.
Cheers
Dinty
9th October 2008, 04:36 PM
G'day All, Footwells are made of steel, and they are available from the usual suspects in Melbourne. The footwells are attached to the b/head by spot welds hope that helps cheers Dennis:angel:
PS Some people just use an angle grinder and cut out the old and weld in the new using a mig/welder, so I suppose it depends on how original you want to keep it looking, and it would be easier to remove the b/head off the chassis too.
Randylandy
9th October 2008, 04:44 PM
Thanks for that just what I needed to know. I intend on getting it relicenced as its in fairly good nick otherwise and will need to go over the pits so not sure if a patch would let it pass.
Randylandy
9th October 2008, 05:05 PM
Have you got contact details for TUS ? I'm in wa and no joy with the google.
Thanks
hodgo
9th October 2008, 05:30 PM
Have you got contact details for TUS ? I'm in wa and no joy with the google.
Thanks
__________________________________________________ ______________
Check with John E on the sight he has or is buying ? a set fro Melbourne for his Ser 3 abut $60 each plus postage and the Melb mob is pretty cheap with freight rates Quoted me $38 for rear cross member Melb. to Brisbane.
Hodgo
JDNSW
9th October 2008, 05:37 PM
Have you got contact details for TUS ? I'm in wa and no joy with the google.
Thanks
Four Wheel Drives in Box Hill, Melbourne. Probably also available from any other Landrover specialists (not dealers).
John
Randylandy
15th October 2008, 05:41 PM
Just removed the old foot well today was pretty easy just removed the guard and drilled out the old spot welds and poped it out. Just need to clean up some surface rust and wait for the new one.
Andy-M
15th October 2008, 05:46 PM
G'Day Randylandy
Have you ordered the footwells?
If you have could you provide the details and price? I have to fit a couple myself very soon.
Cheers Andy.:)
Randylandy
15th October 2008, 08:32 PM
Yeah no problem. Not ordered it yet just trying to track some down now. Will let you know.
RobHay
17th October 2008, 06:38 AM
Page 30 latest catalogue from Melbourne lists footwells at $55 each Right or left hand....
Randylandy
20th October 2008, 04:23 PM
Hi Rob
I'm in WA and fairly new to the land rover suppliers over east. Can some one pass on a phone numbers or web address please as have no luck so far in my serch. Cheers
EchiDna
20th October 2008, 04:42 PM
www.landrovers.com.au (http://www.landrovers.com.au)
Randylandy
21st October 2008, 09:12 PM
just been quoted $77 from Four wheel drives. They have some on order from UK expecting them in couple of weeks.
JohnE
22nd October 2008, 05:54 AM
ok you too
seems to be the standard answer to everybody.
I wonder if they have actually supplied anyone
john
Randylandy
1st November 2008, 07:13 PM
just got a call that they have arrived. Just waiting for mine in the mail now.
Powered by vBulletin® Version 4.2.4 Copyright © 2026 vBulletin Solutions, Inc. All rights reserved.