td5 130

[jimbob]

Hi Guys, I have a quick [ i hope ] question about a vaccume hose that is on the drives side inner guard in the engine bay. It starts from a cilinder thing with 2 tubes and 2 wires coming from it and it finishes on the other side of the engine bay, sort of behind the turbo. I think the cilinder thing has some thing to do with the egr valve {still connected }. So all i want to know is what is the other end meant to be connected to??? I hope that makes sence.

Cheers Jim.:(

[jimbob]

i will get a pic tomorrow maybe that will help.....

Cheers Jim

[jimbob]

here it is.......14146

14147


So can some one tell me what the hose is meant to be attached to please ?

[foz.in.oz]

According to the piccy in the manual its the vent hose for the EGR modulator and should connect to the air box.

edit. type one and pre EU3 type 2 just vents to atmosphere after the little filter. Type 2 post EU3 goes to the airbox

[jimbob]

ah beauty foz thanks for that. i can rest easy then.:D

Cheers

[aew849]

G'day,

Having just consigned the EGR to the spart parts bin, the EU3 TD5 valve has two of the units on the right wing.

Following the directions of the kit, once the hoses are off the EGR, they are plugged with a small bolt/screw, and you then disconnect the electric cables from each modulator... this is to stop 'odd' signals going to the ecu.