wheel bearings

[Sith]

Mine crapped themselves in the front end ....

I have pulled the drivers side apart and they are discintergrated , so i call STATEWIDE Bearings .... no listings for Land Rovers :mad:

I ring the Stealers ... $245 front set

I ring Rova Craft ... but the guy Ian had only series listed ones he quoted me on :(

So is there a listed part number someone can help me out with please ???

[p38arover]

The bearings are as cheap as chips from any bearing supplier. Do a search on the forum, you'll finds all the generic numbers.

[weeds]

timkin LM603011, have a close look around the edge of your old bearing, you should see a number

Land rover part number RTC 3429

[Sith]

are they all the same ? inner and outers ???

There are no numbers on my shells , they are scrap iron now in mulitple pieces

thanx so much WEEDS

[weeds]

yes, all the same 'inner/outer/front/rear, tdi through to td5

[taff]

if your stuck and can't get any then i have a pair here you can have for rovacraft money (that's where i got them from) and i'll put off doing my rear ones till they get more in.

[Brute]

Timken numbers for all wheel bearing on rangy Classic / defender

LM603049
LM603011

2 of each

And seal is a 60 x 80 x 8 double lip seal

Cheers

Ian

[justinc]

Sith, the seals to use to prevent any water entering the hubs AGAIN are RTC3511

JC