101" Lt95's?

[justinc]

Can any of you 101" gurus here tell me if the LT95 that came with these had taper roller intermediate shaft brgs?

Thanks,

JC

[101 Ron]

Just the standard needle rollers.
I was thinking of up grading mine.
British 4wd imports has been advertising a conversion kit to suit 101s.
My machine has non standard ratios and I thnk I would have to get that gear ground to suit the bearings.............I know little about the conversions.
One good point about the conversion is that it seems to stop oil leaks from the intermidate shaft and transfercase housing.

[101 Ron]

I understand the taper roller conversion was worked out here in Aust for the Perentie army rovers as the 6x6 versions and turbo Isuzu was chewing both gearbox and transfercase.

[101 Ron]

The motor being a low compression 3.5 litre and 5.57 diff ratios saves the transmission on a 101 alot as standard.

[101 Ron]

101 up grade to taper roller here
Land Rover 101 Current stock - page 2 (http://101spares.com/parts%20page%202.htm)
http://101spares.com/images/LR%20parts%20small/Taper%20Int.%20gear%20set.jpg