L322 Glovebox / CD Changer Removal

[davros9]

I am in the process of removing the Glovebox to get access to the CD Changer which has a CD jammed in it. What a shocking job! Why they couldn't just put the two screws holding the changer casing on the front I don't know.

Problem is, having followed all the instructions from the LR installation guide to release the glovebox, it won't move - seems very solid. Anyone else done this job? Help needed.

With thanks
davros9

[Scouse]

I'm not sure if this will help, you might have this info already. I do know that it is a PITA type job though.



Remove


Remove upper finisher.
*** 76.46.12 Finisher - upper - drivers side *** (http://gtr.franchise.landrover.com/extdealerlrprod/servlet/LoadAsset?Name=76.46.12_Finisher - upper - drivers side_575.htm#200000575)
Remove lower finisher.
*** 76.46.14 Finisher - lower - passengers side *** (http://gtr.franchise.landrover.com/extdealerlrprod/servlet/LoadAsset?Name=76.46.14_Finisher - lower - passengers side_577.htm#200000577)

Remove 2 Torx screws securing glove box from underside of fascia.
Open glove box.
Remove 5 Torx screws securing glove box.
Disconnect multiplug from lamp.
Release cable from glove box latch.
If fitted: Remove 2 Torx screws securing CD multi-changer to glove box.
If fitted: Withdraw CD multi-changer from glove box and disconnect link lead and both multiplugs. Remove the CD multi-changer.
Remove glove box assembly.

[davros9]

Thanks Scouse
It was the two screws mentioned in instruction 3 on your list - missed them at first.

[p38arover]

see also http://www.aulro.com/afvb/newreply.php'do=newreply&p=1060616