one speed a/c

[stig0000]

well to day off alldays my aircon fan speed only works on fullblast, the temp settings still work as normal, but the blower dont work on 1-2 but works on 3,

im thinking fan speed resistor,, but since i havent come acrose this prob at work im hoping sumone elce has and no a fix for it, or eny idears,

[Sprint]

classic symptom of a dead fan speed resistor

[markyc]

I think I've got the same problem; sometimes 3 speeds, sometimes none! The engine note still changes pitch on all 3 clicks but no blower.
Is it an easy job to replace?

[stig0000]

iv had a qwick look for it,,, but can sumone tell me were the resistor is on a 04 td5

[Ranga]

Also, whilst mine changes with each setting, the highest setting isn't high enough. Is this also a problem with the resistor?

[stig0000]

so this dose sound lik a bit of a prob with this cars,,, i did a serch an found nothing,,, but talking to ppl and there like yer mines dose that,,,

[Blknight.aus]

well to day off alldays my aircon fan speed only works on fullblast, the temp settings still work as normal, but the blower dont work on 1-2 but works on 3,

im thinking fan speed resistor,, but since i havent come acrose this prob at work im hoping sumone elce has and no a fix for it, or eny idears,

thats usually the resistor pack, as mentioned.


Also, whilst mine changes with each setting, the highest setting isn't high enough. Is this also a problem with the resistor?
the fans are pretty asthmatic, but this symptom matches a dodgy earth as well as the start of bearing failure. If it starts blowing fuses on the top setting but not on the first and second its the fan motor.



I think I've got the same problem; sometimes 3 speeds, sometimes none! The engine note still changes pitch on all 3 clicks but no blower.
Is it an easy job to replace?

thats usually the switch contacts not playing the game or the earth connection on the fan motor. Easys a relative term, I reckon its all easy in a shed class. its not too bad in a D1 either.
'