URGENT NANOCOM HELP

[tyreplus4x4]

I have just been installing nanocom and trying to work out functions with ignition on the red light in speedo came on the engine light with a stroke through it comes on when i try to start engine there is nothing apart from horn beeping twice and no power, all lights and acc work what have i done.

[Tombie]

unplug nanocom, lock car, wait 5 min...

come back and unlock.

See if it starts.. if not, post again!

[tyreplus4x4]

unplug nanocom, lock car, wait 5 min...

come back and unlock.

See if it starts.. if not, post again!

Hi Mike i did what you said but no luck,the red light in the speedo flashes when door closed and stays on when door open with no ignition on,it also stays on when ignition on.
Hope you can help Thanks George

[dmdigital]

Check the Disco's battery charge. It's probably dropped below 11.5V. If so charge it up and retry.

[tyreplus4x4]

Check the Disco's battery charge. It's probably dropped below 11.5V. If so charge it up and retry.

Sorry mate it is a Defender and both batteries are fully charged.

Cheers George

[dmdigital]

Must look at the avatar picture next time:oops2:

Have you got the EKA for the Defender? If so try using that.

[tyreplus4x4]

Must look at the avatar picture next time:oops2:

Have you got the EKA for the Defender? If so try using that.

No there is no EKA

[LandyAndy]

I wonder if you accidentley changed the security coding whilst exploring.
Have you used a laptop with Nanocom??? Just makes it a bit easier to use.
Go into the TD5 motor section,click learn security code(or similar,cant exactly remember how its worded) it will re-sync the imobiliser in the ECU.
If this dont work,post again.
GOODLUCK
Andrew

[tyreplus4x4]

I wonder if you accidentley changed the security coding whilst exploring.
Have you used a laptop with Nanocom??? Just makes it a bit easier to use.
Go into the TD5 motor section,click learn security code(or similar,cant exactly remember how its worded) it will re-sync the imobiliser in the ECU.
If this dont work,post again.
GOODLUCK
Andrew

Hi Andrew i did what you said but still the same the nanocom does say the imobiliser is on.
Thanks George

[bluerazor]

Hi
just a quick question but did you by any reason change the EKA code
while playing with the Nanocom?
If so have you tried to "RE-sync" ie by inserting the code with the Keys
in the drivers door? Follow the instructions CAREFULLY from the owners manual.
Good Look
Vince

[Redback]

Hi
just a quick question but did you by any reason change the EKA code
while playing with the Nanocom?
If so have you tried to "RE-sync" ie by inserting the code with the Keys
in the drivers door? Follow the instructions CAREFULLY from the owners manual.
Good Look
Vince

X2 this suggestion.

Baz.

[tyreplus4x4]

Hi
just a quick question but did you by any reason change the EKA code
while playing with the Nanocom?
If so have you tried to "RE-sync" ie by inserting the code with the Keys
in the drivers door? Follow the instructions CAREFULLY from the owners manual.
Good Look
Vince

Hi Vince
thanks for your advice i thought you were on the the right track but it didn't work i think i might have to get it towed to LR specialist.

Thanks George

[LandyAndy]

Hi George.
How about putting a post in general chat asking anybody nearby with Nanocom experience to come and have a look.
Im sure if anybody is close by you will get help.
GOODLUCK
Andrew

[roversmith]

Disable security, not fitted to aus models.

Cheers Greg

[tyreplus4x4]

Hi Guys
Just had the Defender towed to ALL4x4 at Kotara so Ben can get it going for me he also had problems as i did with his diagnostics not responding to anything. He finally got a fob key wich my vehicle doesn't come with and recoded it to my car to get it started then with engine running he disabled the imobiliser so everything is back to normal if anybody has trouble with any of there Landys i highly recomend Ben and his team at ALL4x4 Kotara, and many thanks to everybody for there advice.

Cheers George

[Redback]

Hi Guys
Just had the Defender towed to ALL4x4 at Kotara so Ben can get it going for me he also had problems as i did with his diagnostics not responding to anything. He finally got a fob key wich my vehicle doesn't come with and recoded it to my car to get it started then with engine running he disabled the imobiliser so everything is back to normal if anybody has trouble with any of there Landys i highly recomend Ben and his team at ALL4x4 Kotara, and many thanks to everybody for there advice.

Cheers George

I had a feeling it wasn't the Nanocom that was the problem, we had this security problem with our Disco, but we have a fob and we keyed in the code by using the key in the door to put the code in, but you need the fob to lock and unlock the door to get it to work.

Glad every thing turned out OK.

Baz.