Log in

View Full Version : Disc brake rear to 86 County



land864
10th November 2009, 11:28 AM
Is it possible to fit a complete flange to flange disc brake rear axle / diff assembly from a later 110 into a 1986 110?
Is there an easier way to get a disc braked rear?

abaddonxi
10th November 2009, 12:26 PM
Tell ya in a couple of weeks.

incisor
10th November 2009, 12:30 PM
you need to change the proportioning valve as well i belive...

D110V8D
10th November 2009, 12:48 PM
I think it's best to use the master cyl and booster from the later 110 as well.

maggsie
10th November 2009, 02:16 PM
I have fitted a complete diff (disc to disc) from a '94 Defender using the original booster and m/cylinder from the County. I actually bought the later model booster/master cylinder as well and they are still sitting in the shed. Did the conversion about 4 years ago, no problems and obviously much better with discs all round.

Maggsie
04 V8 Disco
85 V8 County

Freestyler
10th November 2009, 05:48 PM
All you need is 110 front hubs, rear range rover discs and capilpers, and the mounting brackets off a defender. Aparrently you need to remove 3 mm of one side of the brackets? not sure which side. I bought a county wreck that had already had the conversion and maxi drive rear diff lock. One day I'll get around to putting it in along with the PTO Winch.
Tim