Thread: Trailer. Berowra Waters Sydney to Melbourne

Pete, if someone can get it to the Albury Wodonga region, I can get it from there to Melb for you.
Even if someone can get it to Holbrook, Tarcutta, maybe Wagga at a pinch.
We'll be up there (Albury) every two weeks at this point from this coming weekend.

Thanks Chops.

Really appreciate it

See how we go

Pete

A bit more info would be useful. e.g. what sort of coupling, electrical connection and or has it got brakes.

(I think you're using the term "friends" loosely)

Thanks Di

Good thoughts

It is an 8x6, with a 600 x 600mm, full width ,weatherproof tool box in the tray , at the front.
It's registered
I'd say it's probably about 1.5 tonne capacity. I'd need to read the reg papers to confirm that.
Standard 50mm ball coupling
I think its a 7 pin flat electrical but if not I'm pretty sure I supplied an adaptor for the others to hook it up to 7 pin large round anyway.
It does not have brakes
It's a 4WD type trailer. I think it had been a Melb Metro Board of Works Pump or Genset trailer
As I say , if someone wants to load an engine or parts or anything in it to get them down to Melbourne , that would be fine.

Berowra Waters is a bit out of the way and down a narrow winding road.

So, if you think it would be of any help, I could pick it up and park it off the road at a more central location (Normanhurst) for easier pickup by someone Sydney based or someone passing through Sydney from further north.

I'm still good to tow, I have adapters of my own.

Thanks team.

Will wait and see if anyone can make use of it to cart something south.

Then we can work out whether to get it out of Berowra as you say Rog and make pick up easier.

It's on the Marina side too, so the road out to the Dural side is pretty good.

Pete

See Peugeot 206 - towed MELB to SYD or SYD to MELB I'll be empty...