-
5th March 2010, 05:57 PM
#1
Injectors Swap
Gday all, well the old 3.5 Rangie has been running rough for long enough now, I think its time to try to fix it. It only runs rough at idle but other than that it runs fine. I thought maybe it could be the injectors may be leaking a bit. So my question is, can I fit commodore V6 injectors out of the 3.8 V6 into the 3.5 V8 and if so is it a straight swap over or do other mods/adjustments have to be made?
Shano
-
5th March 2010, 06:10 PM
#2
Have a close look at your current injectors. If the have a piece of fuel hose crimped onto the top then they are not interchangeable with anything else...
-
5th March 2010, 07:09 PM
#3
Gday Big Jon,
Just had a look and it seems that the hose is just clamped on with a little hose type clamp.
Shano
-
5th March 2010, 07:23 PM
#4
I had to replace a set of those injectors on an '87 Rangie, so I asked a friend of mine for a set of Rover SD1 injectors. Exact replacement and ran a treat. Just need to find a SD1 enthusiast!
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Search AULRO.com ONLY!
|
Search All the Web!
|
Bookmarks