Results 1 to 4 of 4

Thread: Dual battery clamp

  1. 7th March 2010, 06:41 PM #1
    Felix
    Felix is offline Master
    Join Date
    Jan 2010
    Location
    Sydney
    Posts
    240
    Total Downloaded
    0

    Dual battery clamp

    Hey all, so I've been working on my rangie today and I've noticed I don't have a clamp for the auxillary battery! I had a look at where it was mounted, and there are factory holes for a battery hold down clamp. Was this clamp the same as the other side? Or will I have to source a factory secondary battery clamp?

    Thanks!
    Reply With Quote Reply With Quote
  2. 7th March 2010, 07:11 PM #2
    350RRC's Avatar
    350RRC
    350RRC is offline ForumSage Silver Subscriber
    Join Date
    Mar 2008
    Location
    Bellarine Peninsula, Brackistan
    Posts
    5,502
    Total Downloaded
    0
    Hi Felix,

    You can buy clamps from any of the usual auto chainstores. Consists of a couple of threaded rods with a U at one end, couple of wingnuts and washers and a plastic bar that goes over the top of the battery.

    You might have to drill a couple of holes for the rods. I have these on both my batteries. No probs, 74/81 RRC.

    cheers, DL
    Reply With Quote Reply With Quote
  3. 14th March 2010, 03:30 PM #3
    Armadillo's Avatar
    Armadillo
    Armadillo is offline Master Subscriber
    Join Date
    Mar 2008
    Location
    Townsville
    Posts
    465
    Total Downloaded
    0
    Quote Originally Posted by 350RRC View Post
    Hi Felix,

    You can buy clamps from any of the usual auto chainstores. Consists of a couple of threaded rods with a U at one end, couple of wingnuts and washers and a plastic bar that goes over the top of the battery.

    You might have to drill a couple of holes for the rods. I have these on both my batteries. No probs, 74/81 RRC.

    cheers, DL
    We did the same. Got the generic type and drilled a couple of holes. No problems.

    If the speed of light = 299,792,458 m/s, what is the speed of dark?
    Reply With Quote Reply With Quote
  4. 14th March 2010, 07:01 PM #4
    Felix
    Felix is offline Master
    Join Date
    Jan 2010
    Location
    Sydney
    Posts
    240
    Total Downloaded
    0
    This seems to be a better option, drilling some holes and fitting an aftermarket one. I picked up a genuine one from a wrecker and it doesn't seem to hold the battery in very well... Thanks for the input
    Reply With Quote Reply With Quote
« Cape york rangie | 93 RRC guru required »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!