Thread: Conversion of Auto to Manual choke

I had a pair of both auto and manual choke CD175s. When I was ready to have them restored I was told that the auto choke ones could not be changed to manual. I had the manual ones done up and they are on the car now working well. Still have the auto ones in a box.

Hi discojools,


OK ... so you had the older manual choke CD175 refurbished.

They are the ones that have a brass mixture screw underneath bottom of the bowl?

Later CD175 carbies like mine the mixture is adjusted via a special tool inserted into with dashpots.
The auto choke (from my understanding) used water from the radiator via hoses to activate the choke moving a piston and spring via heat sensitive metals.
I've never seen one in operation so that's why I posted if anyone has one still running to send a pic.

From response looks like no one does? maybe they don't use a choke now.

Mines been converted by the previous owner, to manual choke using crude (but in hindsight real ingenuity) incorporating some of the auto choke mechanism but its shortcomings is that it doesn't always turn off.

This has lead to it's always smelling of fuel (rich mixture) ever since I've owned her, but recently it has a noticeable flat spot and when the engine gets hot (if turned off or stalls) she won't start ?it's been a real bugger stuck on the side of the road or at service station (until she cools down enough to start) and together with noticeable sooty smoke from the exhaust plugs don't take long to foul up.

I don't believe that the old manual choke mechanism is a direct bolt on to the late carbies like mine.

Appreciate your input ....have to decide where to go from here.

Cheers

Baggy