Printable View
Over the last 4 years Mine's cracked and been repaired several times Shane. I think the best "fix" would be to replace the entire section, including the triangular wings and make a timber / ply / fibreglass replacememnt - all depending on preference.
Despite the fact the recess for the radio is insufficient for a decent modern head unit, you'd be better off making one to suit yourself anyway
I'm still thinking about some fab work in that area.
It looks quite straight forward to fabricate new consoles if you have a look at the youtube videos. I just need to the car back together in the interim (I just don't ahve the time for more projects at the moment.... and need to car back together).Quote:
Originally Posted by Mercguy
I'll post some piccies later of what I'm dealing with. No doubt yours is the same.
Surely someone in this country has access to a 3D printer, and the skills to operate it.
I can't believe that LR would be interested in copyright if they don't still produce/provide this stuff?
I wouldn't want a 3D printed console. It would be plastic. Much better to make one out of aluminium/ply/fiberglass. It would be stronger, and it needs to be covered either way :) The radio surround would be the challenge as you need ot include the fuse box and switches into the housing.Quote:
Originally Posted by gavinwibrow
seeya,
Shane L.