Thread: 3.5 running rough

Also check the coolant temp sensor for the efi.

Cool will do that also. How do you check it as in tell if it is playing up or dead

Check resistance at sensor terminals, with engine hot should be around 300 ohms from memory.

Put new sensor in plus other parts like spark plugs etc. now starter has **** its self. Just clicks. Got a spare and same thing.

There is a diagnosis guide for both the flapper and 14CUX EFI systems on another LR forum somewhere, but can't recall it of the top of my head...

I'll go and try and find it...

Ok thanks I need it for both. If you can find it it would be a massive help. Also is that power tune book good.

Originally Posted by disco dan

Ok thanks I need it for both. If you can find it it would be a massive help. Also is that power tune book good.

G`day , for flapper and could be hot wire haven`t looked .

Look here at the top above ( welcome disco dan ) for files , go to tech manuals look for Flapper , shared by Bradtot

Morgan site Gomog or something like but also has eight or 8 i think , not sure , will have both if still about .

Just remembered Gomog plus 8 ?

Originally Posted by PLR

G`day , for flapper and could be hot wire haven`t looked .

Look here at the top above ( welcome disco dan ) for files , go to tech manuals look for Flapper , shared by Bradtot

Morgan site Gomog or something like but also has eight or 8 i think , not sure , will have both if still about .

Just remembered Gomog plus 8 ?

Yep, that's the one I was looking for - I have found it on a different forum before but not here...


http://www.aulro.com/afvb/local_link...id=183&doit=Go