Meet Max

Quote:

---

Originally Posted by grey_ghost

Hi All,

I dropped off my 2 x rear bumpers, and 1 x front bumper to the sand blaster the other day.. And picked them up the next - blasted & primed. $60 per bumper (including the rear metal caps):

https://i.imgur.com/LcM7xH6.jpg

https://i.imgur.com/d0axn1Q.jpg

Here is the first coat of silver - I had been experimenting with different silvers (I think that I tried 5 in total). I'm very happy with the one that I went with:

https://i.imgur.com/Z9wTfYQ.jpg

So when the weather permits - I will be painting the front bumper, rear bumper, end caps, and 5 x wheels all in the silver. [thumbsupbig]

Oh and I have purchased a Gazebo/Tent combination to make as a temporary spray booth - but more of that later when it arrives.. [bigrolf]

Cheers,
GG.

---

That Silver looks good mate.
Like it! [emoji1783][emoji41]

Hi All,

Managed a bit of work on the car this weekend..

Firstly (thanks to 16PMark) - these arrived during the week:

https://i.imgur.com/rpgj54I.jpg

Next - I removed the brackets for the struts both from the body (home made) and on the tailgate also. I will clean these up and paint them:

https://i.imgur.com/EluALb4.jpg

Finally managed to get both rear windows out. The trick was to use WD40 for lubricant, and basically compress the top window seal and slowly ease the top of the window out - with enough force to get it out but not enough to damage anything.. Wiggle, wiggle, wiggle:

https://i.imgur.com/PZeRC13.jpg

https://i.imgur.com/wXvYTQp.jpg

Removed this trim piece - I think that it holds the carpet to cover the tools.. I'm not sure as I didn't have any carpet there..

https://i.imgur.com/Wnqq23l.jpg

Removed the tailgate handle, end locks, lower rubber and the strip that hides the rods:

https://i.imgur.com/VjFMnSn.jpg

https://i.imgur.com/WWEifBS.jpg

Spent hours - literally hours - sanding the tail gate:

https://i.imgur.com/hJRafwA.jpg

https://i.imgur.com/HbdXW6c.jpg

Question for the day - I think that the upper trim piece for the rear windows is held to the body via pop-rivets... I can feel what I think are the back end of the pop-rivets on the top, but I can't see the heads inside the trim/rubber. Does anybody have any tips on how to remove the upper trim bit?

I have removed the lower part of the seal and the chrome trim piece, but the top piece currently has me stumped..

Oh - and I have no idea how I'm going to get those windows back in.. I rekon that it's going to be a difficult job.. :(

Cheers,
GG.

GG, I’m not familiar with the RRC rear window but maybe similar to D1. I have to replace the seal on the D1 and found this YT video. Hopefully it’s useful.

YouTube

Hi rar110,

Thanks for the youtube clip - unfortunately the RRC is nothing like the D1 in this particular area.

However - the good news is that I need to do this job (replacing the window rubber) on my D1 also - so now I know how to do it!!! [thumbsupbig]

Cheers,
GG.

The upper tailgate has scrubbed up awesome. Looks to be minimal rust. Nice!

Hi All,

Unfortunately not much progress this week - I had to work Sunday night, Monday, Tuesday, and tonight as well.. But I did sneak in some work last night.. [thumbsupbig]

Finally worked out how to get the rear windows out - the upper channel is held in by pop-rivets that I had to drill out, but i had to remove the rubber seal first.. Both rear windows are now out:

https://i.imgur.com/l1NY8uh.jpg

Then (as the weather was warm) - I painted a second coat on the rear bumper and a first coat on the front bumper:

https://i.imgur.com/ZJz7b4M.jpg

I have also been speaking to a spray painter... Oh and ordering more parts [bighmmm]

Cheers,
GG

Hi All,

I didn't get to work on the car on Saturday, but I did spend some time on Sunday...

First thing was to remove both the sill tanks - the front seats couldn't be removed until these sill tanks have been removed. I don't plan to re-use these tanks, I am going to remove the associated wiring and fuel lines, and sell them off.

https://i.imgur.com/nehtyW9.jpg

Passenger seat out:

https://i.imgur.com/yyH9RZ7.jpg

Drivers seat out:

https://i.imgur.com/Lz2uYg9.jpg

Seat bases and drivers seat:

https://i.imgur.com/q3nM77C.jpg

https://i.imgur.com/pwwrFaK.jpg

This is the view inside the console - an example of the wiring that lays ahead... [bawl]

https://i.imgur.com/8yN0nu1.jpg

And lastly - I set up a temporary spray booth. I used an old tent, some tables, and some LED strip lighting.

https://i.imgur.com/mTm9P1F.jpg

An example of two of the wheels - this is only the first coat of many. It's the same silver as the bumpers:

https://i.imgur.com/qkfxJm2.jpg

https://i.imgur.com/AwLlPvv.jpg

I also managed to do another coat of the underside of the bumpers on Friday night, no picture though because it doesn't look any different!

Onwards and upwards - I am hoping to do some work on the car tomorrow..

Cheers,
GG.

The floor looks to be in good condition. I assume it steel. Has someone got in with some paint to give the floor some extra protection?

Yes - I am fairly sure that I sanded back surface rust in sections and then primed it.

I am most likely going to put sound deadening on the floor also.

How are we supposed to take it for a drive now the seats are gone? 😁

You’re probably not going to want to watch what I do with that wiring tomorrow... 😉