Page 1 of 2 12 LastLast
Results 1 to 10 of 18

Thread: ABS Front wheel sensor Softdash Classic

  1. #1
    Join Date
    Aug 2007
    Location
    Gosnells
    Posts
    6,148
    Total Downloaded
    0

    ABS Front wheel sensor Softdash Classic

    Pics will save the words. This is some of the damage from my 'TrailBlazing' adventure recently... ABS sensor wires ripped out.
    Before I get tempted to dig them out/re-join, can anyone give me the full WABCO numbers, as there are bound to be 'equivalents' out there.

    Or would the Front wheel sensor from something else fit straight in? (Long shot...)

    diameter is 15.9mm and length is about 58mm - metal section. Wires appear to have entered down into the top...

    There is a magnet inside the unit, strong enough to almost support it's own weight when touching the vernier.

    Otherwise the sensor goes back in to fill the hole.... I've seen one price of over $320 for a replacement.... - yet P38 or D1's are under $50 / thereabouts....
    Attached Images Attached Images

  2. #2
    Join Date
    Aug 2006
    Location
    Kingston, Tassie, OZ.
    Posts
    13,728
    Total Downloaded
    0
    Quote Originally Posted by superquag View Post
    Pics will save the words. This is some of the damage from my 'TrailBlazing' adventure recently... ABS sensor wires ripped out.
    Before I get tempted to dig them out/re-join, can anyone give me the full WABCO numbers, as there are bound to be 'equivalents' out there.

    Or would the Front wheel sensor from something else fit straight in? (Long shot...)

    diameter is 15.9mm and length is about 58mm - metal section. Wires appear to have entered down into the top...

    There is a magnet inside the unit, strong enough to almost support it's own weight when touching the vernier.

    Otherwise the sensor goes back in to fill the hole.... I've seen one price of over $320 for a replacement.... - yet P38 or D1's are under $50 / thereabouts....

    Ive used d1/ earlier rrc ones in softdash models.

    Jc
    The Isuzu 110. Solid and as dependable as a rock, coming soon with auto box😊
    The Range Rover L322 4.4.TTDV8 ....probably won't bother with the remap..😈

  3. #3
    Join Date
    Aug 2007
    Location
    Gosnells
    Posts
    6,148
    Total Downloaded
    0
    Thanks ! prices range well over the $300, worst was $462. - Seems Classic AND D1 sensors are made of Unobtanium....

    found this one at a good price, but won't ship to Oz...
    Land Rover Discovery Front ABS Sensor 94 9 STC1749 L R | eBay

    EDIT:-

    Found another UK supplier who will ship to us down here... Phew,,, Panic over ! Also evilbay-based

  4. #4
    Join Date
    Aug 2006
    Location
    Kingston, Tassie, OZ.
    Posts
    13,728
    Total Downloaded
    0
    😕😕 don't buy any aftermarket ABS sensors...😯
    Better off with genuine used than those.
    Jc
    The Isuzu 110. Solid and as dependable as a rock, coming soon with auto box😊
    The Range Rover L322 4.4.TTDV8 ....probably won't bother with the remap..😈

  5. #5
    Join Date
    Aug 2007
    Location
    Gosnells
    Posts
    6,148
    Total Downloaded
    0
    I had a horrible feeling someone would say that.....

    Just out of Curiosity, what's the problem with 'aftermarket' ones ? Sensitivity? Consistancy? quality?

  6. #6
    Join Date
    Oct 2011
    Location
    Fremantle WA
    Posts
    3,839
    Total Downloaded
    0
    James. If you talk nicely to Baggie, the one on the 93 chassis he just took might just fit?
    D4 MY16 TDV6 - Cambo towing magic, Traxide Batteries, X Lifter, GAP ID Tool, Snorkel, Mitch Hitch, Clearview Mirrors, F&R Dashcams, CB
    RRC MY95 LSE Vogue Softdash "Bessie" with MY99 TD5 and 4HP24 transplants
    SADLY SOLD MY04 D2a TD5 auto and MY10 D4 2.7 both with lots of goodies

  7. #7
    Join Date
    Aug 2007
    Location
    Gosnells
    Posts
    6,148
    Total Downloaded
    0
    I't finally gone ?

    . . . But does he not crave the WABCO ABS Super-System ?

    (or, why should we be the only ones to suffer it's $illiness...)

  8. #8
    Join Date
    Oct 2011
    Location
    Fremantle WA
    Posts
    3,839
    Total Downloaded
    0
    He already has a 2nd classic - only wanted my remains for the engine. It's Baggy not Baggie - excellent citizen so give him a PM.
    D4 MY16 TDV6 - Cambo towing magic, Traxide Batteries, X Lifter, GAP ID Tool, Snorkel, Mitch Hitch, Clearview Mirrors, F&R Dashcams, CB
    RRC MY95 LSE Vogue Softdash "Bessie" with MY99 TD5 and 4HP24 transplants
    SADLY SOLD MY04 D2a TD5 auto and MY10 D4 2.7 both with lots of goodies

  9. #9
    Join Date
    Aug 2007
    Location
    Gosnells
    Posts
    6,148
    Total Downloaded
    0
    Quote Originally Posted by gavinwibrow View Post
    James. If you talk nicely to Baggie, the one on the 93 chassis he just took might just fit?
    It fits perfectly.

    Not only but also, Casey (a.k.a. Baggy) rang this morning...and personally delivered it.

  10. #10
    Join Date
    Oct 2011
    Location
    Fremantle WA
    Posts
    3,839
    Total Downloaded
    0
    So I now know another gentleman rover tragic who is always willing to help - along with you and your many and varied valuable helps.

    Always knew that boy had potential !!!
    D4 MY16 TDV6 - Cambo towing magic, Traxide Batteries, X Lifter, GAP ID Tool, Snorkel, Mitch Hitch, Clearview Mirrors, F&R Dashcams, CB
    RRC MY95 LSE Vogue Softdash "Bessie" with MY99 TD5 and 4HP24 transplants
    SADLY SOLD MY04 D2a TD5 auto and MY10 D4 2.7 both with lots of goodies

Page 1 of 2 12 LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!