Page 1 of 2 12 LastLast
Results 1 to 10 of 18

Thread: RRC EAS Wiring Loom Question

  1. 28th April 2020, 07:25 PM #1
    gavinwibrow's Avatar
    gavinwibrow
    gavinwibrow is offline YarnMaster Silver Subscriber
    Join Date
    Oct 2011
    Location
    Fremantle WA
    Posts
    3,839
    Total Downloaded
    0

    RRC EAS Wiring Loom Question

    Well this is a really long shot.

    It appears that the guy who played with the EAS wiring on my LSE, then had the temerity to have a stroke and die, has left the wiring in a total mess. From a "gaggle" of auto sparkies who have since had a look - their initial thoughts are its so far gone/screwed up as to be almost unfixable.

    I know you can get new full RRC wiring looms (I think ex UK at last mention for about $8,000 - and a bit beyond my ability to pay), but from left field am wondering if anyone has heard of the possibility of procuring a new EAS only loom?

    Worth putting it out there just in case as an almost last gasp attempt to get the old girl mobile without having to go to the sacrilege of fitting coils and foregoing the EAS.
    D4 MY16 TDV6 - Cambo towing magic, Traxide Batteries, X Lifter, GAP ID Tool, Snorkel, Mitch Hitch, Clearview Mirrors, F&R Dashcams, CB
    RRC MY95 LSE Vogue Softdash "Bessie" with MY99 TD5 and 4HP24 transplants
    SADLY SOLD MY04 D2a TD5 auto and MY10 D4 2.7 both with lots of goodies
    Reply With Quote Reply With Quote
  2. 28th April 2020, 08:14 PM #2
    DoubleChevron's Avatar
    DoubleChevron
    DoubleChevron is online now YarnMaster Supporter
    Join Date
    Feb 2013
    Location
    Ballarat,Vic,Aus
    Posts
    3,857
    Total Downloaded
    0
    If you have the wiring diagrams .... and old harness I would have thought it wouldn't be difiicult to make a new one if required ?
    Proper cars--
    '92 Range Rover 3.8V8 ... 5spd manual
    '85 Series II CX2500 GTi Turbo I :burnrubber:
    '63 ID19 x 2 :wheelchair:
    '72 DS21 ie 5spd pallas
    Modern Junk:
    '07 Poogoe 407 HDi 6spd manual :zzz:
    '11 Poogoe RCZ HDI 6spd manual
    Reply With Quote Reply With Quote
  3. 28th April 2020, 09:11 PM #3
    gavinwibrow's Avatar
    gavinwibrow
    gavinwibrow is offline YarnMaster Silver Subscriber
    Join Date
    Oct 2011
    Location
    Fremantle WA
    Posts
    3,839
    Total Downloaded
    0
    Quote Originally Posted by DoubleChevron View Post
    If you have the wiring diagrams .... and old harness I would have thought it wouldn't be difiicult to make a new one if required ?
    Don't have the old harness - basically destroyed by the old fella before he karked it. Having said that, I would have thought not impossible to re-create from the wiring diagrams, although there are quite a few interconnection bits eg rear window open = no EAS working. We shall see!
    D4 MY16 TDV6 - Cambo towing magic, Traxide Batteries, X Lifter, GAP ID Tool, Snorkel, Mitch Hitch, Clearview Mirrors, F&R Dashcams, CB
    RRC MY95 LSE Vogue Softdash "Bessie" with MY99 TD5 and 4HP24 transplants
    SADLY SOLD MY04 D2a TD5 auto and MY10 D4 2.7 both with lots of goodies
    Reply With Quote Reply With Quote
  4. 29th April 2020, 10:29 AM #4
    Chivalry
    Chivalry is offline Master
    Join Date
    Mar 2011
    Location
    Western Australia
    Posts
    260
    Total Downloaded
    0
    I have a soft dash LSE with all the EAS kit intact, you're welcome to come around some day and check that out. You have absolutely nothing left of the old EAS loom? No plugs or anything?
    Reply With Quote Reply With Quote
  5. 29th April 2020, 02:49 PM #5
    gavinwibrow's Avatar
    gavinwibrow
    gavinwibrow is offline YarnMaster Silver Subscriber
    Join Date
    Oct 2011
    Location
    Fremantle WA
    Posts
    3,839
    Total Downloaded
    0
    Quote Originally Posted by Chivalry View Post
    I have a soft dash LSE with all the EAS kit intact, you're welcome to come around some day and check that out. You have absolutely nothing left of the old EAS loom? No plugs or anything?
    No, its the wiring that has disappeared/been butchered, the various plugs and switches are still there. Plus of course there were a few lesser mods done prior when the TD5 was installed by Don in Toowoomba back in about 2004.

    I'm assuming you mean your EAS is still working, given that I remember your dad told me you were an EAS guru.

    Once I can legally travel by car from Fremantle to Bunbury, I think my first task will be to visit you again.
    Cheers Gavin
    D4 MY16 TDV6 - Cambo towing magic, Traxide Batteries, X Lifter, GAP ID Tool, Snorkel, Mitch Hitch, Clearview Mirrors, F&R Dashcams, CB
    RRC MY95 LSE Vogue Softdash "Bessie" with MY99 TD5 and 4HP24 transplants
    SADLY SOLD MY04 D2a TD5 auto and MY10 D4 2.7 both with lots of goodies
    Reply With Quote Reply With Quote
  6. 29th April 2020, 04:54 PM #6
    Chivalry
    Chivalry is offline Master
    Join Date
    Mar 2011
    Location
    Western Australia
    Posts
    260
    Total Downloaded
    0
    Quote Originally Posted by gavinwibrow View Post
    No, its the wiring that has disappeared/been butchered, the various plugs and switches are still there. Plus of course there were a few lesser mods done prior when the TD5 was installed by Don in Toowoomba back in about 2004.

    I'm assuming you mean your EAS is still working, given that I remember your dad told me you were an EAS guru.

    Once I can legally travel by car from Fremantle to Bunbury, I think my first task will be to visit you again.
    Cheers Gavin

    Yes EAS is still working in Sarah, the LSE I have picked up has all of the EAS gear there but has had a coil conversion done, which I will remove. I've got enough spares to put the LSE back on EAS. And yeah my Dad would tell anyone that listened anything he could think of, doesn't mean it's true haha I am no guru, I've just had to learn a bit about it by rebuilding half the EAS in Sarah.
    Reply With Quote Reply With Quote
  7. 29th April 2020, 05:14 PM #7
    gavinwibrow's Avatar
    gavinwibrow
    gavinwibrow is offline YarnMaster Silver Subscriber
    Join Date
    Oct 2011
    Location
    Fremantle WA
    Posts
    3,839
    Total Downloaded
    0
    Quote Originally Posted by Chivalry View Post
    Yes EAS is still working in Sarah, the LSE I have picked up has all of the EAS gear there but has had a coil conversion done, which I will remove. I've got enough spares to put the LSE back on EAS. And yeah my Dad would tell anyone that listened anything he could think of, doesn't mean it's true haha I am no guru, I've just had to learn a bit about it by rebuilding half the EAS in Sarah.
    Ah, but your Dad told me just after you got her from superquag, when I called in - I think to drop off something from him? Your expertise must in part at the very least pre-date the good Lady.
    D4 MY16 TDV6 - Cambo towing magic, Traxide Batteries, X Lifter, GAP ID Tool, Snorkel, Mitch Hitch, Clearview Mirrors, F&R Dashcams, CB
    RRC MY95 LSE Vogue Softdash "Bessie" with MY99 TD5 and 4HP24 transplants
    SADLY SOLD MY04 D2a TD5 auto and MY10 D4 2.7 both with lots of goodies
    Reply With Quote Reply With Quote
  8. 30th April 2020, 11:44 PM #8
    Mercguy's Avatar
    Mercguy
    Mercguy is offline Wizard Silver Subscriber
    Join Date
    Dec 2014
    Location
    FNQ
    Posts
    1,053
    Total Downloaded
    0
    oh dear.

    Gav.
    STOP.
    sleep on it for a few months and then think about not bothering.

    I'll give you a buzz later.
    Roads?.. Where we're going, we don't need roads...
    MY92 RRC 3.9 Ardennes Green
    MY93 RRC LSE 300tdi/R380/LT230 British Racing Green
    MY99 D2 V8 Kinversand
    Reply With Quote Reply With Quote
  9. 5th May 2020, 10:58 AM #9
    gavinwibrow's Avatar
    gavinwibrow
    gavinwibrow is offline YarnMaster Silver Subscriber
    Join Date
    Oct 2011
    Location
    Fremantle WA
    Posts
    3,839
    Total Downloaded
    0
    Quote Originally Posted by Mercguy View Post
    oh dear.

    Gav.
    STOP.
    sleep on it for a few months and then think about not bothering.

    I'll give you a buzz later.



    Maybe just answered my own question? I guess about AU$500 landed ex Craddocks UK?

    ANR1741 - Harness Assembly for Air Suspension Range Rover 108 Inch LWB 1992-1995
    D4 MY16 TDV6 - Cambo towing magic, Traxide Batteries, X Lifter, GAP ID Tool, Snorkel, Mitch Hitch, Clearview Mirrors, F&R Dashcams, CB
    RRC MY95 LSE Vogue Softdash "Bessie" with MY99 TD5 and 4HP24 transplants
    SADLY SOLD MY04 D2a TD5 auto and MY10 D4 2.7 both with lots of goodies
    Reply With Quote Reply With Quote
  10. 5th May 2020, 03:23 PM #10
    Mercguy's Avatar
    Mercguy
    Mercguy is offline Wizard Silver Subscriber
    Join Date
    Dec 2014
    Location
    FNQ
    Posts
    1,053
    Total Downloaded
    0
    Quote Originally Posted by gavinwibrow View Post
    Maybe just answered my own question? I guess about AU$500 landed ex Craddocks UK?

    ANR1741 - Harness Assembly for Air Suspension Range Rover 108 Inch LWB 1992-1995
    That's only part of the solution.
    but a lot less than $8000
    Roads?.. Where we're going, we don't need roads...
    MY92 RRC 3.9 Ardennes Green
    MY93 RRC LSE 300tdi/R380/LT230 British Racing Green
    MY99 D2 V8 Kinversand
    Reply With Quote Reply With Quote
Page 1 of 2 12 LastLast
« 3.9 head | Colour »

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!