Reply With QuoteHoward instruments sell the sender.
You can buy smiths gauges from them brand new..
VDO ones are between 100 and 250 bucks.
If you neeed PTR1000-4B-60. then it's about 98 - the thread on that is 1/4" 19 BSP.
YarnMaster
SupporterYes I’m posting here as I have installed an RRC smiths oil pressure gauge (0-4 bar or 60 psi) in my S2a but need a sender/transducer, the big tin can type. Has anyone got one from a Rangie or what replacement did you use for these? Replacement are stupidly expensive so figured someone here would have replaced theirs or spares I can buy...
Cheers,
Carlos
1994 Land Rover Discovery 300tdi
1963 Land Rover Series 2a 88
Youtube Channel: https://www.youtube.com/channel/UCu3...BtsNIuTyGkAo5w
Instagram: https://instagram.com/rover_tasmania/
Wizard
Howard instruments sell the sender.
You can buy smiths gauges from them brand new..
VDO ones are between 100 and 250 bucks.
If you neeed PTR1000-4B-60. then it's about 98 - the thread on that is 1/4" 19 BSP.
Roads?.. Where we're going, we don't need roads...
MY92 RRC 3.9 Ardennes Green
MY93 RRC LSE 300tdi/R380/LT230 British Racing Green
MY99 D2 V8 Kinversand
YarnMaster
SupporterThanks Mercury - I made contact to see if they got a suitable one, which looking through their catalogue, would have.
Cheers,
Carlos
1994 Land Rover Discovery 300tdi
1963 Land Rover Series 2a 88
Youtube Channel: https://www.youtube.com/channel/UCu3...BtsNIuTyGkAo5w
Instagram: https://instagram.com/rover_tasmania/
Posting Permissions
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks