I bought and installed the larger 60 mm washer.
Attachment 191363 Attachment 191364
Now there is enough material to be able to bend it over the drop arm and one of the flats on the nut.
Phil
Printable View
I bought and installed the larger 60 mm washer.
Attachment 191363 Attachment 191364
Now there is enough material to be able to bend it over the drop arm and one of the flats on the nut.
Phil
While technically you don’t need a press to fit the Super Pro bushes, you may need arms like Popeye.
As I don’t, I used a G clamp and some wood packing to “press” the bushes in.
Attachment 191433
Fitting the trailing arms to the axle was fairly straight forward.
The next step is the bushes in the panhard rod and then I can reinstall the front axle.
Phil
