Bloomin marvellous!Quote:
Originally Posted by Big Dog
Printable View
Bloomin marvellous!Quote:
Originally Posted by Big Dog
Hi
well this is my 91 classic. I bought it off flea bay almost 2 years ago with a buggered b/w transfer for $1100. i thought that was a bargain as it was in pretty good nick. It had a longrange tank and a horrible aluminium truck bullbar and the 3.9 which was good enough to take me up the cape and well..... halfway back anyway as the 2nd hand b/w transfer let me down on the otl. thats another story....
It now has a 200tdi with an r380 and lt230
front and rear arb air lockers
tjm winch bar 9500lb winch
custom rear bar
flexy flares
-25 dynamic rims 33x12.5 tyres
arb roofrack
custom snorkel
hot shower
fridge slide
plus heaps of other stuff
Bigdog,now thats what Im talking about !!!Good to see a RRC Flexxing up ! Bet your not running the old BW TC in that , R380 and Lt230 perhaps ?
Not wrong to list a few as this is awsome fun to driveQuote:
Originally Posted by 400HPONGAS
4" lift + 1" body
LT230
3.5 with 3.9 injection gennie headers with 2.5" mandrel bent exhaust
Maxi Rear hi tough axles, ARB front rovertracks chrommoly axles and cvs
Dual cranked trailing arms with angle welded on plus adjustable Hyme joint on the wishbone
Dislocation cones on rear with 45mm tough dog adjustables all corners
15' x 12.5' x 35' KM2s -25mm rims with internal beadlocks
12000lb kincone winch with 20000lb plasma
full underbody armour, vented cross drilled slotted rotors
bucket seats, dual batteries, dual electric fans, and it just keeps on going
and of course no wife to ask if I can spend money
and on brains
check out outcast offroad website or contact Greg (Grover69) on the club as he does a lot of the work
My 2 door!
4.4 P76
LT95
Rear maxi
rewired with a painless wiring loom
hi mount
3" coils 2" body gq shocks
Needs a fair bit more work but it'll get there eventually
Where's the aircon compressor? LH side of donk, low down?Quote:
Originally Posted by incisor
I had the same roof rack on mine. I think it was an option at the time.
This is the start of mine, just picked it up from the sandblaster today.
Got a little bit of work ahead of me.
https://www.aulro.com/afvb/[/IMG]
https://www.aulro.com/afvb/[/IMG]
https://www.aulro.com/afvb/[/IMG]
Looking forward to seeing some more photo,s as you start to bolt the running gear and body back on Cheers.:DQuote:
Originally Posted by Debacle
Now fill the damn thing with chassis wax or whatever, while you can!!!
That's happening soon. Will probably use either Penetrol or Tectyl sprayed with a Schutz gun with a flexible hose.Quote:
Originally Posted by Davo