Thread: removing arm rest

Originally Posted by big_waity

Hey guys, i'm wanting to fit seat covers to the front seats of my rangie. It has 86 model seats with the adjustable arm rest. I want to keep the arm rest so i'm thinking i'll removes the arm rest, fit the cover, cut a small hole for the pole the rest swings on then re-fit the rest. I can't work out how to removes the rest. Any ideas?

Wind the backrest .... forward
At the back of the seat is a hard plastic backing ... 4 screws under it .. undo em
2 screws on the top @ the sides under the cloth (Hidden) ... peel the cloth to reveal em ... undo them
Take plastic backing off
Cloth is held on to seat frame via plastic rail clip ... release them
Shove hand under the cloth down the side towards the hinge of the arm rest
You will feel 2 13mm bolts ... undo them

Arm rest falls off

All work is done sitting in the rear seat position ..... & working at the back of the front seat

Have fun



Mike

thanks for the reply mike. I'll try it in the morning and let you know how i go.

Thanks for that Mike, was very helpful!
I didn't end up reatatching the arm rest. But I now have the seat covers on and the seats back together.

Originally Posted by big_waity

I didn't end up reatatching the arm rest.

Ahhhhhhhhhhhhhhhhhhhhhhhhhhh ... You went to the effort of doing it right ... and you didn't put em back on ...

Was it because the arm rest gap to the seat, is too close to the covers & jambs up???

The fix for that is .....
All you have to do is add a "5mm to 10mm thick oversized nut" on those bolt / brackets to space it out (armrests) further to clear the new covers ... There is plenty of excess thread on those bolts to accommodate the spacer nuts

Cut a neat hole in the covers to install / insert the arm rest hinge bracket

I did this and have installed Sheepskin covers & it works a treat



You can't drive a RR without the arm rests !!!! ... There King seats

Now do it properly .... It's a Range Rover

Mike

Originally Posted by mike 90 RR

You can't drive a RR without the arm rests !!!! ... There King seats

Now do it properly .... It's a Range Rover

Amen.

I wouldn't be without armrests.

I have a 89 rangie, and it doesn't have arm rests
I would like to have them ......as was said.....it is a range rover
Anthony

i didn't refit them because i was in a hurry. I am hating on having them. They'll go back on when i get a chance.

Originally Posted by big_waity

They'll go back on when i get a chance.

Pictures would be the go


Mike