Thread: which springs to buy

Have a look here: Les Richmond Automotive

Their website uses frames or something, so you'll have to navigate via "Vehicle Accessories", then "Range Rover Classic" then "Replacement Coil Springs"

HTH
David

Hi,

My RRC came with a 'Pedders heavy duty high lift kit (2")' when I bought it about a decade ago. The springs even had a little bit of red paint left on them.

I've tried other springs, including some LRA ones that came with a spare RRC I bought, but have stuck these Pedders springs back in because they are the only ones I've used that carry weight on a trip properly and have not appreciably sagged in 400,000 k's.

Obviously Pedders don't make them, but I would recommend springs from whoever did. Ring Pedders maybe.

cheers, DL

Originally Posted by 350RRC

Hi,

My RRC came with a 'Pedders heavy duty high lift kit (2")' when I bought it about a decade ago. The springs even had a little bit of red paint left on them.

I've tried other springs, including some LRA ones that came with a spare RRC I bought, but have stuck these Pedders springs back in because they are the only ones I've used that carry weight on a trip properly and have not appreciably sagged in 400,000 k's.

Obviously Pedders don't make them, but I would recommend springs from whoever did. Ring Pedders maybe.

cheers, DL

The pedders i bought 15 years ago were kings painted red, their shocks are **** though.

Originally Posted by spook

howdy just like some info on springs for my rangie it has the 2inch king springs with 30mL spacers,which one of the rear springs now has dropped, i had the same thing when i had patrols with the king springs,they dropped to one side, so what brand of spring would you reccommend thanks luke, 93 range rover 2inch lift ARB bars front and rear no winch ,255/55/16 big horns.

Try Dobinsons springs and shocks. Very happy with them on a Landcruiser, RRC, Disco 1 and another RRC. Bob

IME the last set of Kings springs I fitted to a D1 2 years ago have sagged 25mm already They are progressive rate KRRR05HD, the heaviest for a D1 rear. Not impressed. Conversely, all the LRA springs I have fitted and the ones on my RRC (Which have been in for 7 years now with a 4BD1 over the top of them) have been faultless

JC

browns springs in melbourne wont go wrong they know there stuff

LRA springs all the way...........I thought they where by Browns. I have also used and still use Lovells, tried Kings and had the sagging issue, sold The Pedders...........to short

give Shane a call at Suspension Stuff in Qld, he knows his stuff and is very helpful

https://www.suspensionstuff.com.au/shop/