You are a out the third this month........easy enough fixQuote:
Originally Posted by G.I.BO
Printable View
You are a out the third this month........easy enough fixQuote:
Originally Posted by G.I.BO
yep
Heh. I reccon I'd be reaching for the Ventolin too if my stick broke like that.
Today took my 8yo son for a cruise in the FFR around Heaton & Watagans.
Had fun descending a steep hill, only to find a dead end at the bottom. Getting back up the hill was a little more challenging. :eek:
PS, Have you noticed that photos or video really don't do justice to steep inclines? ;)
I managed to break off a series 2 gearstick many moons ago & for extra strength I drilled out the base ( ball part) to the shaft diameter & inserted the gearstick, then welded. It was therefore about 20mm shorter but hardly noticeable.Quote:
Originally Posted by Bearman
I modified my jerrycans with a plate & embedded nut so that they are bolted to the carriers. They will be MT 99% of the time but look better than an empty carrier. I figured the average opportunistic thief won't work that out in a hurry. I'd love to see them trying to lift it out :twisted:
https://www.aulro.com/afvb/images/im...2014/07/29.jpg
Took the new toy on its first outing post-Army on a trip from Marysville to Walhalla via Matlock and some of the trig/service roads en route. Needless to say it performed very well (better than some of the new non-Landrovers). Will be replacing the canvas top at some stage though - we needed to wear waterproofs inside!
Unfortunately, my old County console was a bit too wide to fit in the Perentie so I used it as a template & got to work with some marine ply & the Triton saw bench. I made this one a bit higher so it doubles as an armrest. Does the job...
https://www.aulro.com/afvb/images/im...14/08/1441.jpg
Where is the best place to get a new canvas for a Perentie as the one on a mates vehicle (GS) is very shabby on the top?
Cheers, Mick.
G'day Mick.
Robco products are the OEM supplier and now able to sell to the public.
Info on this canopy fitting thread, about p3.
They can make the canopies in other canvas than Digicam.
http://www.aulro.com/afvb/coil-sprun...op-fitted.html
If your mate wants something other than the original design, any good canvas maker could help.
Fitted power steering using a KLR kit. I already had a second hand Discovery box so purchased the kit minus steering box. The Drop arm from the manual box can be used with any 4 bolt power steer box. I did put a seal kit in the Disco box prior to fitting, as a precaution.
What a difference! I can actually park it now and its much more enjoyable to drive. Definitely the best mod I've done yet.
I would recommend the kit and the service from KLR (no affiliation). The kit is comprehensive with everything included plus detailed instructions. Its obvious that a fair bit of thought has been put into the hose and fitting configuration.