The ends off the cables have the lugs crimped on. I was thinking of maybe getting some plastic and making a bit if a mud deflector for it hahaQuote:
Originally Posted by Carzee
Printable View
The ends off the cables have the lugs crimped on. I was thinking of maybe getting some plastic and making a bit if a mud deflector for it hahaQuote:
Originally Posted by Carzee
Just installed a new set of head lights, Chinese knock off similar to jw speaker lights, quality looks great, have plugged them up and the look as bright as the lights on our audi q5 during the day. They fit in the old headlight housing with some modifications (the housing that is) Have to wait till dark to see how well they perform, but enormous improvement on the stock lights.
Still need to do a the relay upgrade, but the less still use less power than the stock.
Will report back with more info and images after dark.
Do you have a link and how much $$ ?
Just catching the perentie bug.
1990 Perentie 6x6 Air Defence GS ARM 51867
2013 Range Rover Sport
1996 6X6 Infantry Carrier Hard Top ARN 202238
Just installed my christmas pressie!
After doing my headlight wiring upgrade I finally have all the right bits to refurbish the headlights themselves. Also polished the stone guards and used 90/100w globes.
Before:
https://www.aulro.com/afvb/images/im...015/02/108.jpg
After:
https://www.aulro.com/afvb/images/im...015/02/109.jpg
Anyone know what the notches are for in the headlight surrounds behind the stone guards? Just realised I put them on the wrong orientation.
Here are the bits and pieces I used.
Headlights:
PM678 | Wipac Crystal Halogen Headlamp Conversion Kit (pair) - left hand dip (UK and Australia)
Headlight half bowls:
Components
Headlight wiring upgrade kit:
Def-COMBO HL & Driving Light Wiring Kit | TRAXIDE - RV | Traxide - RV
But I made the mistake of not getting the complete headlight kit, including the bowls. Woops. So have a search for Wipac S6051 or S6050.
Screwdriver access to adjust the lights.Quote:
Originally Posted by BadCo.
John
I had considered that but they don't seem to line up. I'll double check tomorrow.Quote:
Originally Posted by JDNSW
Might not line up, but that's what they are for!Quote:
Originally Posted by BadCo.
John
Mean, thanks for that.Quote:
Originally Posted by JDNSW
EDIT: Spun them around, they do line up. Teaches me for doing work after work haha
Wired in a civilian trailer plug, used the attached pictures supplied by Diana (thanks!) just had to splice the black into the reverse light.
Haven't tested it yet so not sure if supplied information was correct. I'm confident it is though!
https://www.aulro.com/afvb/images/im...015/01/652.jpg
Its sitting behind the drivers side convoy light on the rear crossmember. I allowed room for a bigger tire to squeeze in also. It can't be seen from outside the truck, took me a while to decide where to put it, any thoughts on location?
-Bad