Thread: fitting hard top to perentie

I have located this old Landy at a scrap metal yard. (see attachment if it works)

Would anybody know if this roof would fit on a standard cargo Perentie?

Cheers Chris

I'm no expert by a long shot but from the research I've done you need to remove roll bars and remove roll bar mounting points that are welded in or modify hardtop to fit around these. The other option is swapping out the whole side panel... Someone may be able to correct me if I'm wrong about any of this... Also not sure how that hardtop will mount to top of windscreen and doors ect???

Originally Posted by Cgwy

I have located this old Landy at a scrap metal yard. (see attachment if it works)

Would anybody know if this roof would fit on a standard cargo Perentie?

Cheers Chris

Hi,

Unfortunately no it wont fit.

This is a Series 109" canopy, so 1" too short but biggest issue is the windscreen, the 110 has a higher windscreen compared to a Series windscreen and just wont work.

There is also the issue as previously stated that the roll bars need removing etc - I'd be keeping them (actually I am on the two perenties I own) - Saftey first.

If you get a hard top of a civy 110 or defender that will fit, alll you need to do is take the rope clamp off the top of the windscreen (and the roll bars).

Hope this helps

regards
Scott

Originally Posted by Cgwy

I have located this old Landy at a scrap metal yard. (see attachment if it works)

Would anybody know if this roof would fit on a standard cargo Perentie?

Cheers Chris

I know that a S3 roof and sides will fit as long as you change the windscreen and frame as well. It means you have to remove the 110 windscreen and fit the Series one which will bolt straight up to the roof, and as mentioned remove the roll bars. The 1" difference is in the wheelbase not the body.

Thanks guys. Very useful

Cheers
Chris

Originally Posted by Bearman

I know that a S3 roof and sides will fit as long as you change the windscreen and frame as well. It means you have to remove the 110 windscreen and fit the Series one which will bolt straight up to the roof, and as mentioned remove the roll bars. The 1" difference is in the wheelbase not the body.

but won't the 110 windscreen wipers foul on the S3 windscreen frame centre section?

Originally Posted by 87County

but won't the 110 windscreen wipers foul on the S3 windscreen frame centre section?

Good question and to be honest I can't remember what the bloke did with the wipers. It was back in the late 80's when I saw it done. The County had a roll and was fitted with the series bits as no 110 bits were available second hand.

This is the hardtop you need

Body parts from Land Rover 110/County 2 door. | Auto Body parts | Gumtree Australia Cabonne Area - Spring Hill | 1044088028