perentie canvas fitting

Quote:

---

Originally Posted by Trraca

LandroverScott

Thanks for your very clear explanation. My only problem is:-

You mentioned a rubber windstopper over the doors. I have recently taken off my canopy, waterproofed and replaced it. I didn't see a windstopper. Is it similar to a door seal and does it fit in the channel above the window along with the cord (with the wire threader) that ties down the canopy edge?

cheers
Trraca

---

Yep basically a door seal, just holds in it tight above the doors and stops a bit of wind flap right next to your head

cheers

Just removed my canopy.

The long rope above the door tops ran down the back of the B pillar, then wound around the tab that links the first hoop to the door frame / B pillar.

Does this sound right?

It would appear my rack mounts were through-drilled just prior to the auction. There's shiny new bolts holding the rack on, plus quite a bit of fresh metal filings in the tub.

The irony is the front holes are right next to the safety notice, indicating not to drill or weld the ROPS. :mad:

ROFL
Yer, that was a typo on the sticker.
It should have read "Do not drill or weld structure...unless you really really want to" ;-)