Show us your Perenties! - The Landy Lizard thread

No problem, Unfortunately I don't have an assembly diagram but it looks like it would be reasonably easy to reassemble as long as all the bits are there. I had never even seen one until a couple of years ago until I bought the one I have advertised on ebay UK. If you decide to get the one off me you could pull it apart and see how it all fits together. My guess is the one you have has wear in the discs and probably slips there. That small amount of wear on the casing shell wouldn't give a drive problem in my opinion.

Good chat with Brian today. Seems that ive definatly got a V8 RR early box and its not too good. After some advise and great info from Brian ive sorta found out my probs with this centre diff. This muggins didnt press the bearing on far enough onto the centre diff casing. It would seem that the press tool I used bottomed out on the centre diff casing b4 the bearing bottomed out. Bugger. The workshop is closed today so cant fix it till tomorrow. Glad I found the prob thanks to Brian and now will be able to sort it quicker. Would still like to put proper perentie box with pto for front winch back into it. Anyone got a good one going cheap? Im not a rich man...lol

Cheers Rod

Finally after storing it for 4 years have finally registered
New top to fit this week.
Just installed turbo, a holset hx30 on genuine Isuzu manifold,
Best thing i did was turbo,
Armstrong power steering

Maybe fresh paint later, fabricate side bars this week
Attachment 135868

Quote:

---

Originally Posted by Mudnutter

Finally after storing it for 4 years have finally registered
New top to fit this week.
Just installed turbo, a holset hx30 on genuine Isuzu manifold,
Best thing i did was turbo,
Armstrong power steering

Maybe fresh paint later, fabricate side bars this week
Attachment 135868

---

Hi. What are you doing with the old canvas? Im trying to get some to repair my ffr canvas that the PO stuffed up royally. Im certainly not rich enough to buy a new one.

Cheers Rod

Quote:

---

Originally Posted by 67hardtop

Hi. What are you doing with the old canvas? Im trying to get some to repair my ffr canvas that the PO stuffed up royally. Im certainly not rich enough to buy a new one.

Cheers Rod

---

Have you tried Alegayter Sails on Old Port Rd at Hendon Rod? I had a sail repaired there years back and I reckon they do other canvas stuff.

Quote:

---

Originally Posted by Gordie

Have you tried Alegayter Sails on Old Port Rd at Hendon Rod? I had a sail repaired there years back and I reckon they do other canvas stuff.

---

Thanks Gordie, im trying to match up the canvas as much as i can. If i supply good used canvas it wont look too much out of place. But if i cant match it then new stuff will have to be the go i spose.

Cheers Rod

Attachment 136279

Leading the way at Sandy Cape track, Tasmaniahttps://www.aulro.com/afvb/images/im...018/02/366.jpg

Quote:

---

Originally Posted by deputy821

Attachment 136279

---

Great looking hard top! Is this a stock hard top, or did you fit it to a soft top? If so, were you able to keep your rollover bars in place by modifying the hard top?

Hi All,

I haven't posted in here yet... Here are some pics of mine (now) - and in service (thanks to the folk on REMLR)...

https://www.aulro.com/afvb/images/im...018/02/322.jpgIMG_2714 by Grey Ghost, on Flickr

https://www.aulro.com/afvb/images/im...018/02/613.jpgIMG_0721 by Grey Ghost, on Flickr

https://www.aulro.com/afvb/images/im...018/02/614.jpgS70A Blackhawk by Grey Ghost, on Flickr

https://www.aulro.com/afvb/images/im...018/02/615.jpgExercise3 by Grey Ghost, on Flickr

Cheers,
GG.