Results 1 to 9 of 9

Thread: Lessons learned: A day in the life of 50-140

  1. #1
    Join Date
    Mar 2014
    Location
    Hunter Valley, NSW
    Posts
    232
    Total Downloaded
    0

    Lessons learned: A day in the life of 50-140

    Long story on the way here, so for those who don't like a lot of detail (or reading much), I'll post the bottom line up front:

    First point: Two rivets are not sufficient to secure your front number plate to the Perentie brush bar. Even (especially) if it is a slimline plate.

    Second point: If you lose your NSW personalised number plate(s) and have to report them lost (per legal requirement), then you are going to have a serious problem getting them replaced.

    Quite possibly serious enough to compell you to go fishing in every bog hole you drove through in the previous 24 hours.

    Due to a combination of factors, not least of which: the previous 24 hours fell on a Sunday and; your vehicle being a Perentie, there might have been quite a few of them. Bog holes, that is

    Some of these numerous bog holes might be very ... pungent smelling. Prompting one to wonder what else might be lying on the bottom of said waterlogged ditch, waiting for your garden rake to disturb it, so to release yet more fragrant goodness.

    Go on. Ask me how I know this.


    Not sure why one came out sideways, but here's some pics:
    Attached Images Attached Images
    Last edited by DBT; 11th August 2014 at 04:00 PM. Reason: clarity

  2. #2
    Join Date
    Mar 2014
    Location
    Hunter Valley, NSW
    Posts
    232
    Total Downloaded
    0
    Third point:

    More photos you take of your vehicle during an outing = more forensic evidence that may be available to assist your investigation.
    Attached Images Attached Images
    Last edited by DBT; 11th August 2014 at 04:09 PM. Reason: Picture

  3. #3
    Join Date
    Oct 2008
    Location
    Heart in the Deep Nth of FNQ,Body in the Deep Nth of Brisneyland
    Posts
    1,623
    Total Downloaded
    0
    G'Day mate.
    Bugger.
    I lost a plate last year on an AULRO drive. ripped off when I pushed a burnt wreck of the road.
    You would have thought 5-6 people watching would see that?
    Na!
    Cheers, BDave.
    Replace "You are...!", with "Are you...?"

    Army Land Rover Buyers Guide.
    buymilitaryvehicles.com

    Reunited with RFSV 51 680, 'Sleazy'!!
    '00 VeryDisco TD5 Auto,
    Nanocom Evo for D2 TD5 and Puma
    Gone:RFSV, 51-699, Carryall 48-358.

  4. #4
    Join Date
    Mar 2014
    Location
    Hunter Valley, NSW
    Posts
    232
    Total Downloaded
    0
    Indeed Dave. Was just me and 9yo son on this trip. But for all the photos I took, I did not notice 'till the hose down back at home.


    Attached a suspicious photo above that I took on the day and totally missed the evidence at the time.


    There's more to this story. Just stringing y'all along to measure interest.
    Last edited by DBT; 11th August 2014 at 04:13 PM. Reason: spelling

  5. #5
    Join Date
    Mar 2014
    Location
    Hunter Valley, NSW
    Posts
    232
    Total Downloaded
    0
    OK, on second thought this is a forum, not a novel, so the good news is I did find the lost plate today.

    And no it wasn't in one of the bog holes, though that's certainly where the damage was done.

    After dragging the bottom of several holes and realising the futility of the exercise, I started to drive home again.

    Just getting back on the hard top after some fast dirt, I was coasting in 3rd when a glint of light caught my eye off on the shoulder.

    I slammed the brakes on in pitiful yet eternal hope, only to be immediately overtaken by the dust cloud that was trailing behind.

    Once the coughing stopped and my eyes cleared, I investigated and was delighted to find my mangled yet mostly intact front plate.

    So yes, miracles do happen.
    Attached Images Attached Images

  6. #6
    Join Date
    Oct 2008
    Location
    Heart in the Deep Nth of FNQ,Body in the Deep Nth of Brisneyland
    Posts
    1,623
    Total Downloaded
    0
    Raaaayayyyy
    It was going to be too much of a pain to get a single plate re-issued so I let it ride for a while.
    In the meantime another good samaritan handed it in to a Station 45 minutes away where it languished for a while before they returned it to Qld Tport.

    The upshot of my episode was some probing questions from QPS about any connection with the stolen and burned car :/

    In the end, I just got a new set issued at the same time as I registered my Carryall. For a few weeks I had 2 Landies with sequential number plates for no additional cost! added another couple of rivets to be sure, this time
    Cheers, BDave.
    Replace "You are...!", with "Are you...?"

    Army Land Rover Buyers Guide.
    buymilitaryvehicles.com

    Reunited with RFSV 51 680, 'Sleazy'!!
    '00 VeryDisco TD5 Auto,
    Nanocom Evo for D2 TD5 and Puma
    Gone:RFSV, 51-699, Carryall 48-358.

  7. #7
    Join Date
    Feb 2013
    Location
    Sunshine Coast
    Posts
    790
    Total Downloaded
    0
    Good story, with a happy ending to boot. I lost a plate in the Bloomfield River once. Sufficed to say, I didn't bother looking for it.

    I might nip out tonight and put another couple of rivets in my plates

  8. #8
    Join Date
    Jan 1970
    Location
    Avoca Beach
    Posts
    14,150
    Total Downloaded
    0
    I have found that a reason that they fall off is, if they are only attached at the top, the force of water from the bow wave lifts them up and if strong enough snaps them off.
    I have come home to find my front plate at 90 degrees on my old RRC, when I took off the big bracket to take off the spoiler and rivetted it to the bumper.
    So rivet it at all corners or attach it to a length of piano hinge which is then attached to the bumper.
    Regards Philip A
    Last edited by PhilipA; 12th August 2014 at 07:51 AM. Reason: more info

  9. #9
    Join Date
    Mar 2014
    Location
    Hunter Valley, NSW
    Posts
    232
    Total Downloaded
    0
    Yep. Pretty much what happened Philip. Looking at my recovered plate, the water has bent it up. One rivet tore out and the other held on, putting a right angle bend in one corner.

    Back on the road, a bit of speed and the airflow must have finished it off. We had left the forrest briefly to go to the shops, then headed back in for the "scenic route" home.

    One thing for sure, modern plates are a lot thinner than they used to be.

    I now have 4 rivets in each, front and rear.

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!