Results 1 to 7 of 7

Thread: Fuel Filter bleed

  1. #1
    Join Date
    Feb 2014
    Location
    sydney
    Posts
    28
    Total Downloaded
    0

    Fuel Filter bleed

    Being a newcomer to Diesels I've been trying to find out the procedure for bleeding the fuel system upon replacing the fuel filter.

    I thought this info would be pretty easy to come by, but I've read the field/base/unit EMEI's, a few other ISUZU publications, and searched the forums here, but I can't find any info that points out what bolt to crack on the adapter. I've attached a pic of the adapter in my perentie with banjo bolt heads labelled A and B, if anyone could tell me which one I should go for it would be great.
    Attached Images Attached Images

  2. #2
    Join Date
    Oct 2011
    Location
    Burra NSW
    Posts
    933
    Total Downloaded
    0
    When you change your filter, fill the new one with diesel, do it up, crack bolt a, and then unscrew the silver disc in the bottom left of the screen on the side of the injector pump, this is the hand primer, pump until the air bubbles coming out of your cracked bolt turn into clean fuel, then lock it off. push down and turn primer to lock and you should be good to start.
    I'm not sure about these 3.9isuzus but the isuzus I've had in earthmoving gear also had a small gauze filter on the banjo bolt going into the injector pump, they were forever filling up with crap and starving the motor for fuel..

  3. #3
    JDNSW's Avatar
    JDNSW is offline RoverLord Silver Subscriber
    Join Date
    Jan 1970
    Location
    Central West NSW
    Posts
    29,510
    Total Downloaded
    0
    Quote Originally Posted by Summiitt View Post
    .....
    I'm not sure about these 3.9isuzus but the isuzus I've had in earthmoving gear also had a small gauze filter on the banjo bolt going into the injector pump, they were forever filling up with crap and starving the motor for fuel..
    Yes, but how often this needs checking depends on how much crap you have in your fuel tank. And it is almost impossible to get at, as it is inside the engine mount bracket!

    John
    John

    JDNSW
    1986 110 County 3.9 diesel
    1970 2a 109 2.25 petrol

  4. #4
    Join Date
    Jun 2014
    Location
    Waitakere, New Zealand
    Posts
    1,270
    Total Downloaded
    0
    Is it that silver disc? The one on my truck looks a bit like a old school silver tap handle, or is that something different?

  5. #5
    JDNSW's Avatar
    JDNSW is offline RoverLord Silver Subscriber
    Join Date
    Jan 1970
    Location
    Central West NSW
    Posts
    29,510
    Total Downloaded
    0
    Quote Originally Posted by BadCo. View Post
    Is it that silver disc? The one on my truck looks a bit like a old school silver tap handle, or is that something different?
    I think there are several different looking handles on the primer pump - mine is different from the one in the owners manual! Regardless, it is the only thing that looks at all like a hadle on the outside of the injection pump.

    John
    John

    JDNSW
    1986 110 County 3.9 diesel
    1970 2a 109 2.25 petrol

  6. #6
    Join Date
    Feb 2014
    Location
    sydney
    Posts
    28
    Total Downloaded
    0
    Quote Originally Posted by Summiitt View Post
    When you change your filter, fill the new one with diesel, do it up, crack bolt a, and then unscrew the silver disc in the bottom left of the screen on the side of the injector pump, this is the hand primer, pump until the air bubbles coming out of your cracked bolt turn into clean fuel, then lock it off. push down and turn primer to lock and you should be good to start.
    I'm not sure about these 3.9isuzus but the isuzus I've had in earthmoving gear also had a small gauze filter on the banjo bolt going into the injector pump, they were forever filling up with crap and starving the motor for fuel..
    Thanks for the info! I thought it might be "A" as it's the higher of the two on the adapter, but I wasn't 100% on it and didn't want to risk pumping air into the system and having to do a full bleed, which I will now inevitably have to do if I want to replace the seized drain plug on the fuel sedimenter

  7. #7
    Join Date
    Jun 2014
    Location
    Waitakere, New Zealand
    Posts
    1,270
    Total Downloaded
    0
    Quote Originally Posted by solidrock View Post
    Thanks for the info! I thought it might be "A" as it's the higher of the two on the adapter, but I wasn't 100% on it and didn't want to risk pumping air into the system and having to do a full bleed, which I will now inevitably have to do if I want to replace the seized drain plug on the fuel sedimenter
    Probably every Perentie drain plug is seized, try here for how to remove it, information courtesy of a member from remlr I believe.

    http://www.aulro.com/afvb/isuzu-land...ml#post2236123

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!