Thread: Air-con in the 6x6

Originally Posted by TK_Co

Hello all,
From what I understand, the 6x6 ambulance variant has "factory" air-con.

I was wondering if anyone has some info and pics on the factory set up? Does it use the same heater box as the standard 6x6 ? I have noted that it uses a Sanden SD510 A/C compressor. But would love some info on the compressor mounts, drive, condenser model and mounts. Evaporator type?

Or is everyone just going to a more modern aftermarket system?

Any pics, advise and info would be appreciated.

Regards,
Tristan Hartridge


Just catching the perentie bug.

• 1990 Perentie 6x6 Air Defence GS
•2013 Range Rover Sport

Hi Tristan, does your 6x6 have both the 12v & 24v alternators, you could consider a ply n play roof mount system in 12v or 24v (24v being more efficient ) as per my attached pic. These are not a cheap system but very easy to install, as l stated earlier it is truly a plug n play system…..Gaz.

Originally Posted by gaz

Hi Tristan, does your 6x6 have both the 12v & 24v alternators, you could consider a ply n play roof mount system in 12v or 24v (24v being more efficient ) as per my attached pic. These are not a cheap system but very easy to install, as l stated earlier it is truly a plug n play system…..Gaz.

Love the roof rack !!
I was thinking something a little more original. While the roof mount units are very efficient, I was hoping to put a cab over slide on camper on the back so it would foul up.

I do have the 24V FFR system on it too.


Just catching the perentie bug.

• 1990 Perentie 6x6 Air Defence GS
•2013 Range Rover Sport

Originally Posted by TK_Co

Love the roof rack !!
I was thinking something a little more original. While the roof mount units are very efficient, I was hoping to put a cab over slide on camper on the back so it would foul up.

I do have the 24V FFR system on it too.


Just catching the perentie bug.

• 1990 Perentie 6x6 Air Defence GS
•2013 Range Rover Sport

Yes i agree roof mounted air con can get in the way, we were lucky to have a slide on camper already which hasn't interfered with build. ( as per attached ). Keep the 24v alternator will come in handy.

Very nice set up!

Originally Posted by 303gunner

Very nice set up!

Thank you l will get around to doing a build thread with pics in the near future.

Originally Posted by 303gunner

Very nice set up!

I agree with gunner, looks very good !


Just catching the perentie bug.

• 1990 Perentie 6x6 Air Defence GS
•2013 Range Rover Sport

Originally Posted by TK_Co

Love the roof rack !!
I was thinking something a little more original. While the roof mount units are very efficient, I was hoping to put a cab over slide on camper on the back so it would foul up.

Red Dot make an evaporator unit that would fit on the back wall of the cab between the seats, it's less than 6" thick.
R8545 Red Dot Back Wall Evaportaor
Pete

Originally Posted by PeteFox

Red Dot make an evaporator unit that would fit on the back wall of the cab between the seats, it's less than 6" thick.
R8545 Red Dot Back Wall Evaportaor
Pete

Thanks for the input Pete. I'll look into it ! Does it still need a front mounted condenser or do you cut a hole in rear wall and gets it's airflow from there?


Just catching the perentie bug.

• 1990 Perentie 6x6 Air Defence GS
•2013 Range Rover Sport