Results 1 to 7 of 7

Thread: Perentie brake disc condemning thickness

  1. 18th March 2015, 05:52 PM #1
    oldyella 76
    oldyella 76 is offline Master Subscriber
    Join Date
    Jul 2006
    Location
    Huntly via Bendigo
    Posts
    443
    Total Downloaded
    0

    Perentie brake disc condemning thickness

    A friend has a perentie with discs on the steer, it has had club plates and he wishes to get full rego. He has had a preliminary roadworthy and has been told that the front discs need replacing, one is 14.2 mm and the other 14.5 mm. The question is what is the condemning thickness of these discs.
    He has also been knocked for the Bull bar, and small sections of rust on the frame of the rear door and the skin on the front door. There were a couple of other small things that won't cost much to replace.
    Hope someone can help with the discs and if they are crook where would one get them.
    Thanks for the help.
    Lindsay.
    Reply With Quote Reply With Quote
  2. 18th March 2015, 06:15 PM #2
    Mick_Marsh's Avatar
    Mick_Marsh
    Mick_Marsh is offline Swaggie
    Join Date
    Nov 2009
    Location
    Western Victoria
    Posts
    14,101
    Total Downloaded
    0
    What was wrong with the bull bar?
    Reply With Quote Reply With Quote
  3. 18th March 2015, 06:57 PM #3
    Outlaw's Avatar
    Outlaw
    Outlaw is offline Da BogMeister
    Administrator
    Join Date
    Oct 2003
    Location
    Gold Coast, Qld.
    Posts
    8,931
    Total Downloaded
    0
    How's it on club rego?

    FOX 2008 RRS - Artemis 1989 Perentie FFR - Phoenix S2a 88" with more - Beetlejuice 1956 S1 86" - GCLRO #001 - REMLR #176
    EVL '96 Defender 110 - Emerald '63 2a Ambulance 112-221 - Christine '93 Rangy - Van '98 Rangy - Rachael '76 S3 GS - Special '70 S2a GS - Miss B '86 Rangy -     RAAF Tactical 200184 & 200168

    Reply With Quote Reply With Quote
  4. 18th March 2015, 07:10 PM #4
    oldyella 76
    oldyella 76 is offline Master Subscriber
    Join Date
    Jul 2006
    Location
    Huntly via Bendigo
    Posts
    443
    Total Downloaded
    0
    Past club rego but now with full rego, the bull bar has projections on the front that apparently are dangerous. I think I will loan him a bumper bar for the r/worthy. I have found some discs on flea bay for him.
    Lindsay.
    Reply With Quote Reply With Quote
  5. 18th March 2015, 07:25 PM #5
    Mick_Marsh's Avatar
    Mick_Marsh
    Mick_Marsh is offline Swaggie
    Join Date
    Nov 2009
    Location
    Western Victoria
    Posts
    14,101
    Total Downloaded
    0
    Quote Originally Posted by Outlaw View Post
    How's it on club rego?
    It's not. It's on a club permit. The Victorian club permit rules are different to the Queensland club registration rules.
    Your question may need to be a little less broad.
    Reply With Quote Reply With Quote
  6. 18th March 2015, 07:29 PM #6
    Mick_Marsh's Avatar
    Mick_Marsh
    Mick_Marsh is offline Swaggie
    Join Date
    Nov 2009
    Location
    Western Victoria
    Posts
    14,101
    Total Downloaded
    0
    Quote Originally Posted by oldyella 76 View Post
    the bull bar has projections on the front that apparently are dangerous.
    That is rubbish. The roadworthy inspector is applying the wrong ADRs. He doesn't know his job.
    I reckon your solution is not a bad one in this case. If your bumper fits.
    Reply With Quote Reply With Quote
  7. 18th March 2015, 08:14 PM #7
    Blknight.aus's Avatar
    Blknight.aus
    Blknight.aus is offline RoverLord Vendor
    Join Date
    Aug 2006
    Location
    Melbourn(ish)
    Posts
    26,495
    Total Downloaded
    0
    EMEI VEH G 103 para 167. c. sayeth

    c. Measure the thickness of the disc. If it is less than 13mm (0.51in) replace the disc.

    would you like to know more?
    Dave

    "In a Landrover the other vehicle is your crumple zone."

    For spelling call Rogets, for mechanicing call me.

    Fozzy, 2.25D SIII Ex DCA Ute
    Tdi autoManual d1 (gave it to the Mupion)
    Archaeoptersix 1990 6x6 dual cab(This things staying)


    If you've benefited from one or more of my posts please remember, your taxes paid for my skill sets, I'm just trying to make sure you get your monies worth.
    If you think you're in front on the deal, pay it forwards.
    Reply With Quote Reply With Quote
« Fuel Bleed | Perentie spares »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!