Results 1 to 7 of 7

Thread: Clutch

  1. 25th April 2015, 04:34 PM #1
    Paultan
    Paultan is offline Master Supporter
    Join Date
    Mar 2014
    Location
    New Zealand
    Posts
    109
    Total Downloaded
    0

    Clutch

    Ok so I went to drive the Landy today, and the clutch pedal has no resistance. So clutch doesn't work. The clutch was fine when I parked her up middle of the week. Should i get the AA to drop it off to my mechanic? Any ideas.

    Rgds
    Paul
    Reply With Quote Reply With Quote
  2. 25th April 2015, 04:39 PM #2
    lucas.armstrong.77's Avatar
    lucas.armstrong.77
    lucas.armstrong.77 is offline Fossicker
    Join Date
    Mar 2014
    Posts
    65
    Total Downloaded
    0
    I had the same response when my slave cylinder failed, new slave cost me about $40 but was a real pain to put in, a pressure clutch hose also blew after that which gave a similar response, I would fill up your resoirvour get some on the peddle with you under the car with a torch to see if there is a leak in the hoses or possibly a leak in the slave gaskets
    Reply With Quote Reply With Quote
  3. 25th April 2015, 05:55 PM #3
    BadCo.'s Avatar
    BadCo.
    BadCo. is offline Wizard
    Join Date
    Jun 2014
    Location
    Waitakere, New Zealand
    Posts
    1,270
    Total Downloaded
    0
    Haha Paultan, I've got a leaky slave as well. Just waiting on the part to be delivered.
    Reply With Quote Reply With Quote
  4. 25th April 2015, 06:37 PM #4
    Paultan
    Paultan is offline Master Supporter
    Join Date
    Mar 2014
    Location
    New Zealand
    Posts
    109
    Total Downloaded
    0
    Thanks guys. Will have a check in the morning.
    Reply With Quote Reply With Quote
  5. 30th April 2015, 03:33 PM #5
    tyne's Avatar
    tyne
    tyne is offline Fossicker
    Join Date
    Dec 2011
    Location
    North west NSW
    Posts
    92
    Total Downloaded
    0
    As they said slave cyc.
    Hard to tell just by looking but my guess would be if you undid the wading bung on the bottom of the bell housing fluid will dribble out.
    Watch a YouTube vid or 2 before jumping in, I can't remember what but something is pretty important...
    Sorry I couldn't be anymore help.
    Reply With Quote Reply With Quote
  6. 30th April 2015, 05:50 PM #6
    Blknight.aus's Avatar
    Blknight.aus
    Blknight.aus is offline RoverLord Vendor
    Join Date
    Aug 2006
    Location
    Melbourn(ish)
    Posts
    26,495
    Total Downloaded
    0
    clutch pushrod retaining clip and locating the pushrod is what you're worried about on a slave cylinder replacement
    b
    Dave

    "In a Landrover the other vehicle is your crumple zone."

    For spelling call Rogets, for mechanicing call me.

    Fozzy, 2.25D SIII Ex DCA Ute
    Tdi autoManual d1 (gave it to the Mupion)
    Archaeoptersix 1990 6x6 dual cab(This things staying)


    If you've benefited from one or more of my posts please remember, your taxes paid for my skill sets, I'm just trying to make sure you get your monies worth.
    If you think you're in front on the deal, pay it forwards.
    Reply With Quote Reply With Quote
  7. 1st May 2015, 11:23 AM #7
    Paultan
    Paultan is offline Master Supporter
    Join Date
    Mar 2014
    Location
    New Zealand
    Posts
    109
    Total Downloaded
    0
    Have removed the old cylinder, it certainly looked past it's best. Interestingly there was no dust cover on it. Have a replacement and will try to fit it this weekend, if the rain stays away !

    Cheers for all your comments.

    Rgds
    Paul
    Reply With Quote Reply With Quote
« Lost clutch fluid | Reverse and brake lights . »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!