Results 1 to 4 of 4

Thread: 4X4 and 6X6 driveshafts

  1. 20th December 2015, 08:54 PM #1
    Bearman's Avatar
    Bearman
    Bearman is offline TopicToaster Gold Subscriber
    Join Date
    Jun 2006
    Location
    Hay Point
    Posts
    4,043
    Total Downloaded
    0

    4X4 and 6X6 driveshafts

    Just out of interest does anyone know if there is any difference between the front and rear (intermediate in the case of the 6X6) propeller shafts. Even though they have slightly different part numbers I have compared them side to side and can't see any difference. I have a couple of spare new ones for a 4X4 and it looks like they will end up on the 6by one day
    Cheers......Brian
    1985 110 V8 County
    1998 110 Perentie GS Cargo 6X6 ARN 202516 (Brutus)
    Reply With Quote Reply With Quote
  2. 20th December 2015, 09:53 PM #2
    BadCo.'s Avatar
    BadCo.
    BadCo. is offline Wizard
    Join Date
    Jun 2014
    Location
    Waitakere, New Zealand
    Posts
    1,270
    Total Downloaded
    0
    Is there a difference in the overall length with the slip yoke fully extended or compressed?

    Just chucking ideas out there...

    Sent from my Nexus 4 using AULRO mobile app
    Reply With Quote Reply With Quote
  3. 21st December 2015, 12:06 AM #3
    Blknight.aus's Avatar
    Blknight.aus
    Blknight.aus is offline RoverLord Vendor
    Join Date
    Aug 2006
    Location
    Melbourn(ish)
    Posts
    26,495
    Total Downloaded
    0
    intermediate to rear are different on a 6x6

    intermediate on a 6x6 is almost identical to the rear on a 4x4 from memory but has a different number as part of being identified under a different part stream and as a sub part of the whole rear drive shaft assembly. I'll have to check my RPS's to find out what the part numbers were

    its like the difference between the left and right window secion, same bit of glass but because of a minor difference (the side the finger hold is pushed in from and the orientation of the sliding seal) it gets a different part number.
    Dave

    "In a Landrover the other vehicle is your crumple zone."

    For spelling call Rogets, for mechanicing call me.

    Fozzy, 2.25D SIII Ex DCA Ute
    Tdi autoManual d1 (gave it to the Mupion)
    Archaeoptersix 1990 6x6 dual cab(This things staying)


    If you've benefited from one or more of my posts please remember, your taxes paid for my skill sets, I'm just trying to make sure you get your monies worth.
    If you think you're in front on the deal, pay it forwards.
    Reply With Quote Reply With Quote
  4. 21st December 2015, 06:01 AM #4
    Bearman's Avatar
    Bearman
    Bearman is offline TopicToaster Gold Subscriber
    Join Date
    Jun 2006
    Location
    Hay Point
    Posts
    4,043
    Total Downloaded
    0
    Thanks Dave, I thought that may have been the case. They appear to be the same thing just a different part number according to my RPS for both vehicles.
    Cheers......Brian
    1985 110 V8 County
    1998 110 Perentie GS Cargo 6X6 ARN 202516 (Brutus)
    Reply With Quote Reply With Quote
« Fuel leak in perentie 110 | towing engineering »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!