Just buy a new neoprene seal for under the gearstick Chris.
So I removed the transmission tunnel today (noticed yesterday when I was under it that the insulation on the underside was just sitting on the gearbox, no longer sticking to the plastic tunnel, so I thought I'd pull it off and replace it seeing I have everything else out at the moment anyway)
and found that there is an oil leak where the gearstick goes into the top of the box.
It looks like there is a seal there that has pretty much disintegrated.
Any tips on what I should do?
Imgur Album
Just buy a new neoprene seal for under the gearstick Chris.
Cheers......Brian
1985 110 V8 County
1998 110 Perentie GS Cargo 6X6 ARN 202516 (Brutus)
Part number is R622387. East to fit, just undo the 3 shouldered studs that hold the gearstick to the top of the box and remove the gearstick, lube the inside circumference of the new seal and push it over the ball (from the bottom) then bolt it back on. Hey presto, no more oil leaks for another 10 odd years and it also holds the gearstick a lot firmer.
Cheers......Brian
1985 110 V8 County
1998 110 Perentie GS Cargo 6X6 ARN 202516 (Brutus)
While I'm ordering parts, is there a part number for the window felt (RHS).
mine is rattly and annoying.
C'mon Chris, you must know how to find part numbers by now.
I get my part numbers from here
sometimes though It doesn't have the right one (like the gearstick seal)
and either I'm not reading it right or it doesn't have a listing for the window seal.
It there a better source so I don't have to spam the board continually?
There most certainly is!
Have a read of this thread:
http://remlr.com/forum/index.php'topic=3783.0
Sent from my Nexus 4 using AULRO mobile app
| Search AULRO.com ONLY! | Search All the Web! | 
|---|
|  |  | 
Bookmarks