Thread: Changing seats

The Isri seats have the sliders that bolt to the seat box.

The Stratos have a folded metal bracket onto which the sliders bolt and the rails/brackets then bolt onto the seat box. These are somewhat similar in design to the Mud Stuff seat rails.

If you have one seat cushion that removes, you most likely have Isri seats. You may also find that the drivers seat cushion will remove too but the release is stuck. (Although there are Isri seats that don't have the removable cushion, e.g. the rear seats in the RFSV and LRPV and 6x6 troop carriers.)

Originally Posted by Lotz-A-Landies

The Isri seats have the sliders that bolt to the seat box.

The Stratos have a folded metal bracket onto which the sliders bolt and the rails/brackets then bolt onto the seat box. These are somewhat similar in design to the Mud Stuff seat rails.

If you have one seat cushion that removes, you most likely have Isri seats. You may also find that the drivers seat cushion will remove too but the release is stuck. (Although there are Isri seats that don't have the removable cushion, e.g. the rear seats in the RFSV and LRPV and 6x6 troop carriers.)

Put a couple of photos up, but based on what you've said there, I'd say I have Isri's.
Are there different release mechanisms? The passenger one is in the centre and easy to find.
I've taken the whole drivers seat out (needed to clean mud off the top of the tank) and the seat seems fixed to the frame.

Originally Posted by Chris078

Put a couple of photos up, but based on what you've said there, I'd say I have Isri's.
Are there different release mechanisms? The passenger one is in the centre and easy to find.
I've taken the whole drivers seat out (needed to clean mud off the top of the tank) and the seat seems fixed to the frame.

Hi, the passenger is an ISRI and the drivers an original. ISRI has centre release button to pop the base up, the original has two pins that you need to remove an "R" clip then pull it up

cheers

Thanks!
So when you say it's original, you mean it's neither an Isri or Stratos but an actual Land rover seat?

Working on the basis that it is a land rover seat, does anyone have a part number?

The closest I could find is MWC4535. It looks like it could be right. It has a little release button on the side for removing the seat base which mine does not have, which makes me unsure.

Hi Chris

The problem I have with your images is the seat covers which hide the original form. The driver's seat, apparently with the thigh support and the little lever for the seat slides/runner could be a Stratos, but without the folded bracket underneath. I think that when Defence and Stratos designed the mounting they may have used original Land Rover parts for the slides.

Does the driver's seat have a large wheel on the hinge mechanism to change the rake of the seat back, but doesn't have a quick release mechanism? (On a Stratos drivers side seat the adjusting wheel in on the LHS of the seat.)

I can't take an image of my Stratos seats till Friday, when I go out to where 50-422 is stored.

Diana

Thanks Diana,
I took some more photos and sent them to Stratos (looking at the PUB I thought it might be a Stratos) but they agree with LandRoverScott that the drivers seat is a Land Rover seat(and frame)

The passenger is definitely an ISRI, found that stamped on it this morning.

That might be a blessing as I imagine a Land rover seat base will be easier to find than a Stratos one.
Probably the same price though

Chris

I think that you have two Isri seats, the drivers side is the original early type with the metal lever to release/adjust the rake of the squab and the passengers side is the later Isri design with the yellow lever/knob that adjusts the rake.

The slide/runner on the driver's seat is the same as used on the Stratos but I believe that this is a Land Rover part.

The cushion bases for both types of Irsi are available through the Land Rover parts chain, Isri will send you to Land Rover for these (I've contacted them before).

Diana