Page 1 of 2 12 LastLast
Results 1 to 10 of 13

Thread: Perentie Luggage Security

  1. #1
    Join Date
    Dec 2008
    Location
    Victoria
    Posts
    1,777
    Total Downloaded
    0

    Perentie Luggage Security

    The idea of a Perentie can be quite appealing with its rugged, simple reliability, a hard wearing interior with loads of room and body panels which you might not mind so much when they acquire some scratches and minor dints.

    All good so far but the question of security comes to mind or more specifically the security of the owners goods and chattels. Canvas is not much of a deterrent to light fingered types.


    How are guys securing what can be a quite large volumetric and extensive amount of camping gear, food, fridge, recovery equipment, tools, chain saw etc when they leave the car and go bush walking for the day? Or just stopping at shopping centres for the replenishment of supplies when touring?

  2. #2
    Join Date
    May 2007
    Location
    in the wild New England, NSW
    Posts
    4,918
    Total Downloaded
    0
    I've never had a problem, even going back to the Series days when I had an ex-mil ragtop one of them, but I can understand your concern.

    The partial alternative is to install a 110 hardtop in place of the rag top and as we all know, these will only "keep the honest people out".

    I have an RFSV variant in which I have left one of the large lockers in place. While this provides more than adequate lockup space, I am aware that a determined breaker and enterer could soon dispose of that.

    We are living in a time unfortunately, when every thief can carry a battery angle grinder which they probably lifted from the big green hardware social providore - there is no defence to that kind of bastard.

    On the side tool lockers, for which every man and his dog has a key when they remain as issued, I have installed key locks. If you do this, please be more thoughtful than some I have seen fitted with ugly with hasps and staples

  3. #3
    JDNSW's Avatar
    JDNSW is offline RoverLord Silver Subscriber
    Join Date
    Jan 1970
    Location
    Central West NSW
    Posts
    29,511
    Total Downloaded
    0
    WhatI have condred doig for my canvas on the 2a is to get some 50x50x6mm reinforcing mesh, and attach it with bracket to the side of the tub and the horizontal bars with brackets bent up from strap iron, either bolted (with rivetted over bolts if thought necessary), and with a "top tailgate" of te same material pivoted on the hoop and closing outside the tailgate but it flat lops that go on the same pins as the tailgte fasteners. Once the wedge lock is in place padlock on the bottom ensures it cannot be opened. Depending on how secure you want it, a roof of the same could be fitted or not. If it were horizontal instead of arched it could double as a storage spot, but might need some reinforcing.

    While not totally thief-proof, it would be fairly good. The mesh could be seen through the windows as a deterrent.
    John

    JDNSW
    1986 110 County 3.9 diesel
    1970 2a 109 2.25 petrol

  4. #4
    Join Date
    Jan 2008
    Location
    Nowra NSW
    Posts
    3,906
    Total Downloaded
    0
    For years I have had exarmy soft top vehicles of different types.
    I try not to leave them unattended if they have goodies inside.
    I never had a problem, most likely due to the fact it looks military.
    I never had a jerrycan of petrol stolen or its contents borrowed from the rear jerrycan holders on both Landrovers and Jeeps, even if the vehicles was left alone in public car park late at night.
    I always thought a jerry of fuel would walk away .

  5. #5
    Join Date
    Jan 2008
    Location
    Nowra NSW
    Posts
    3,906
    Total Downloaded
    0
    I have put thought into if I was taking a ex military soft top to northern Australia , the previously noted steel mesh idea is the way to go.
    I would use just normal worm drive hose clamps to hold the mesh to the canopy bows etc behind the standard canvass and some of the hose clamps if left loose could act as hinges for sections of mesh with standard padlock on the other end of the mesh around both the mesh and bows or frame etc.
    This is certainly not fool proof, but is easy to use and set up and makes it hard to do a quick look, snatch , grab and run.

  6. #6
    Join Date
    Dec 2008
    Location
    Victoria
    Posts
    1,777
    Total Downloaded
    0
    Thanks for the helpful responses guys. Much appreciated. I like the idea....and simplicity..... of mesh panels fastened to the roll over bars with worm drive clamps to make an internal cage. That is exactly how my dog pens mesh sheets are fastened to the pens frame.

    I think perhaps that thankfully you have been very lucky to escape the thieves attentions 101 Ron and 87County

    Unfortunately I know of quite a few vehicles left untended in the bush by their owners only to come back and find them tampered with and by tampering I mean from basic breaking in to the removal of bars, winches, tyres and rims etc.

    Some time ago at a local riverside park I was only some 50 odd yards away with one of my Weimaraners so I had left my dual cab with its canopy door up and tail gate down. Inside was a Stihl chain saw. Another fourby came along and stopped at the back of my car. The front passenger got out and jumped into my dual cab. I heard chains bang as they came to full extension and the guy swearing. The saw was chained to the vehicle. It was then I released one 35 kg and totally ticked off protective dog. He charged them yodeling at the top of his voice. The thieves totally panicked, yelling their heads off and couldn't get away from the scene quick enough.

  7. #7
    Homestar's Avatar
    Homestar is offline Super Moderator & CA manager Subscriber
    Join Date
    Aug 2010
    Location
    Sunbury, VIC
    Posts
    20,105
    Total Downloaded
    0
    Never had an issue with my 101 even when fully kitted out with all my camping gear. As mentioned, it seems people won't go near ex military vehicles. Left it in plenty of car parks when shopping, etc without issues and at campsites. I've also never encountered road rage against me in it either no matter what I do, who I cut off or what speed I trundle along at come to think of it.
    If you need to contact me please email homestarrunnerau@gmail.com - thanks - Gav.

  8. #8
    Join Date
    Dec 2008
    Location
    Victoria
    Posts
    1,777
    Total Downloaded
    0
    Quote Originally Posted by Homestar View Post
    I've also never encountered road rage against me in it either no matter what I do, who I cut off or what speed I trundle along at come to think of it.
    In your 101 I'd let you do what you want and go where you like too. Might is right.........

    Back in the 90s/early 2000s there was a professional hunting guide who drove an ex army 101 around Victoria and in particular the Alps. By chance encounters I camped with him a few times in the scrub. Bit of a likeable rogue and he could spin a great yarn and loved his whisky. In fact the more whisky consumed the better the yarn....lol. Did you ever come across him him?

  9. #9
    Homestar's Avatar
    Homestar is offline Super Moderator & CA manager Subscriber
    Join Date
    Aug 2010
    Location
    Sunbury, VIC
    Posts
    20,105
    Total Downloaded
    0
    No, sounds like a character. Do you know if he’s still got the 101 or still floating around?
    If you need to contact me please email homestarrunnerau@gmail.com - thanks - Gav.

  10. #10
    Join Date
    Apr 2014
    Location
    Blair Athol, Adelaide South Aust.
    Posts
    2,745
    Total Downloaded
    0
    Quote Originally Posted by 87County View Post
    I've never had a problem, even going back to the Series days when I had an ex-mil ragtop one of them, but I can understand your concern.

    The partial alternative is to install a 110 hardtop in place of the rag top and as we all know, these will only "keep the honest people out".

    I have an RFSV variant in which I have left one of the large lockers in place. While this provides more than adequate lockup space, I am aware that a determined breaker and enterer could soon dispose of that.

    We are living in a time unfortunately, when every thief can carry a battery angle grinder which they probably lifted from the big green hardware social providore - there is no defence to that kind of bastard.

    On the side tool lockers, for which every man and his dog has a key when they remain as issued, I have installed key locks. If you do this, please be more thoughtful than some I have seen fitted with ugly with hasps and staples
    Pics of locks pls??? and how to??

Page 1 of 2 12 LastLast

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!