Thread: ICOM 400 Pro Question.

the icom 400 pro programs up to the new channels just fine

Apparently the icom 440 doesn't .... which is what I almost bought.

Not enough dash real estate in the D2 for the 400

Originally Posted by mark2

If your channels are in the frequency range 450-500 Mhz it can be done. If you tell me the location of a repeater near you, I can look up the frequency.

They are a 128 channel unit which will leave 88 channels for other purposes.

If you use repeaters you will need to know the repeater offset and the CTCSS access codes for the repeater (if any).

The 50MHz coverage can be shifted down.
Mine now covers from around 430MHz (amateur band) up so also does CB.
I also have some commercial frequencies in that I need.
They are a good solid unit, and you can vary the power in 3 steps up to 25W - actually that is the designed standard but it is possible to tweak it much higher, Why you would want to(?) no idea.

Fit the scrambler unit and talk in private


.

Thanks for the info guys.
Ive given the boss the Icom dealer contact and the supplied frequencies will see how it goes.
Andrew

is there a sorta of icom dealer that can program the channs in for you, its just a simple usb connection no?

Originally Posted by stig0000

is there a sorta of icom dealer that can program the channs in for you, its just a simple usb connection no?

All depends if the ICOM can recieve the emergency channels,from the reply here the answer is no.
The Boss can contact a WA dealer.
Andrew

mines is the 400 pro,, and it has the extra chans and i can get to them easy buy press F and select rx then its 41-128 i think,, just i think the freqwences need to be set or sumthing???

or is there something up with mine,, iv seen customer cars and theyv shown me theres and its got pre set, cop fire ses instead of my rx,

allso mine dosent scan, i think dad has pressed to many buttens and stuffed it all up,