Page 2 of 2 FirstFirst 12
Results 11 to 13 of 13

Thread: Hand held FDC FD450UH B(CB)+4-001M

  1. #11
    Join Date
    May 2011
    Location
    Balmain NSW (inner west)
    Posts
    47
    Total Downloaded
    0
    Just a side note - these radio's are brilliant.

  2. #12
    Join Date
    Oct 2007
    Location
    Wantabadgery, N.S.W.
    Posts
    2,742
    Total Downloaded
    0
    Success!!.Thanks Howard for your advice. It seems the manufacturers rep is wrong about these things. I've reprogrammed one of my radios tonight with relative ease. once I got some peace to concentrate on the keystrokes and frequency numbers. I don't have the cable, just did it through the keypad. I got the frequencies from the link below:

    UHF CB Australia - 80 Channel UHF CB Radio Information & Allocations

    Don

  3. #13
    Join Date
    Oct 2007
    Location
    Wantabadgery, N.S.W.
    Posts
    2,742
    Total Downloaded
    0
    An update on these FDC 450 radios from 409shop.
    I've discovered while reprogramming my second unit to the new 80 channel system, that they can be set to increase frequency in steps of either 5k, 6.5k, 10k, 12.5k, or 25k. So by setting the radio to increase by 12.5k then advancing twice you arrive at the next desired frequency.Set the new channel number,then do it again and so on, till you've got the second 40 channels all set and numbered.
    This manual is handy to have near by for the key strokes.
    http://bricofred.ch/fdc_txrx/fdc_460...ion_manual.pdf

    And this one for the frequencies.
    UHF CB Australia - 80 Channel UHF CB Radio Information & Allocations

    Don.

Page 2 of 2 FirstFirst 12

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!