-
4th January 2012, 12:52 PM
#1
GME TX3520 Fault
Bought a GME TX3520 a month ago. Just got around to fitting it today.
Fits up nice into the D2, but all I can get it to show is V1-01
Anything I can do there, or return for warranty?
-
8th January 2012, 07:39 AM
#2
The radio is not booting up properly could be as simple as a cable not connected properly in the radio or could be much more. They have 3 years warranty, take it back to where you got it. they fill either fix it or get you a new one. This fault also comes up when a vehicle has been jump started with the radio still connected or has been hooked up to power back to front. They will know if they lift the lid so don't lie if this happened.
-
9th January 2012, 07:23 PM
#3
None of the above done.
Wouldn't work from first power up, polarity correct.
Took it GME today (just around the corner from work), they tell me they have had some software issues. Sending it to head office for fix or replace.
Will take a week, but I can wait, after all it took me a month to get around to install
-
16th January 2012, 06:52 PM
#4
Got the radio back Friday. Excellent turn around from GME.
Docket says they replaced a crystal.
Now it works fine.
The warranty experience with GME is good.
-
17th January 2012, 08:55 PM
#5
We deal with them alot and genarally get good results with warranty or technical issues
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Search AULRO.com ONLY!
|
Search All the Web!
|
Bookmarks