Thread: Which type of reversing camera?

Originally Posted by Ancient Mariner

I fitted the rear vision type to the 110. Great 7" rear vision mirror,provision for three cameras rear, front ,side, or rear and 2 sides also a video input. Pic shows effect of bright sunlight with half being in shade altho not as bad as shown in pic .The distance lines are adjustable and the pic quality would be better if the camera had a wash once in a while

AM

Can I ask how much that cost. I like the idea of replacing the small rear visiion mirror with a larger one with reversing camera included, but I'm a bit daunted by the costs I've heard.

I did wonder about getting a GPS such as a Hema HN7 if it could double as a revensing camera and mounting it on the driver's side of the steering wheel to avoid blocking central vision, as that would kill two birds with one stone - GPS and reversing camera.
Sent from my GT-P5210 using AULRO mobile app

Check out this discussion
http://www.aulro.com/afvb/showthread.php't=202693

Originally Posted by DiscoMick

Can I ask how much that cost. I like the idea of replacing the small rear visiion mirror with a larger one with reversing camera included, but I'm a bit daunted by the costs I've heard.

I did wonder about getting a GPS such as a Hema HN7 if it could double as a revensing camera and mounting it on the driver's side of the steering wheel to avoid blocking central vision, as that would kill two birds with one stone - GPS and reversing camera.
Sent from my GT-P5210 using AULRO mobile app

Look up elinz electronics on ebay mine was the $189.I have a hn7 mounted below windscreen level I decided on the mirror as a lot of the time the hn7 is out of the car

Noel

Originally Posted by Tombie

Dash upgrade...


Get the fascia here: http://www.entreq.de/products/entertainment.html

Or
Connects2 CT23LR04

I notice there are tow prices to this double din facia to take a gos and other buttons ....how hard is this to fit ....and is there anywhere in Sydney where you can get this reliably fitted

Originally Posted by Tombie

Dash upgrade...


Get the fascia here: http://www.entreq.de/products/entertainment.html

Or
Connects2 CT23LR04

I note that this facia kit appears to have 2 parts to take all the buttons
I'm thinking of fitting one of these to fit a GPS/ reversing camera
Question .....how hard are these to fit .......or is there a good auto elec \GOS fitter in Sydney I could use to do it properly

I have also seen ads for the double DIN fascias in English LR mags.

Sent from my GT-P5210 using AULRO mobile app