Printable View
That is correct Michael, I am going for the 100% reversible. It will actually live in the back behind the front Pax seat mounted in an as yet to be made false floor. I'm also looking at a Drifta Car Back kitchen to live under this false floor which will also be the outside kitchen for our soon to arrive caravan!Quote:
Originally Posted by Surrufus
Agree with you on the panel mount stuff if it's a permanent install.
Cheers Nigel
Carling Technologies make a dual 3.15A charger in their common 'rocker switch' footprint.
IP64 too!
[ame]https://www.youtube.com/watch?v=_oH1-z9D5z4&feature=youtu.be[/ame]
[ame]http://www.carlingtech.com/sites/default/files/documents/V-Charger_datasheet.pdf[/ame]
Skookum as!
yeeeeees,,,
but where does it fit?
the wider switches around the binnacle would be about the same size but the usb cord would be directly behind your knuckles,
the switch block left of the ashtray would be ideal but the switches are much smaller,,, :(
Quote:
Originally Posted by Toxic_Avenger
Only 3.1A though Knackers!!!
Quote:
Originally Posted by Pedro_The_Swift
Got heated seats?
Maybe some of the defender drivers amongst us will sacrifice a few amps for the IP64 rating. Because you may want to charge you phone inside the car while its raining. :angel:Quote:
Originally Posted by Tombie
I just wish I could find a single wire in USB. Dosent need to be high power.
As I have already mounted 3 switches above the mirror. But if I could just tuck a USB in that cavity. So can feed a short USB to power a dash cam.
might not be exactly what you were after, but maybe you can fit this one in?
6 Gang Aluminium Switch Panel Circuitblue LED Rocker Breaker Car RV Boat Marine | eBay
:twisted: sorry!!
Quote:
Originally Posted by turps
Something like this?
https://www.aulro.com/afvb/images/im...16/09/1150.jpg
That would work. Good find. It's hard to find some of the random ideas I have in my head.