Page 3 of 3 FirstFirst 123
Results 21 to 25 of 25

Thread: Codan 9323 help needed

  1. #21
    Join Date
    Sep 2010
    Location
    The Hills.
    Posts
    19,175
    Total Downloaded
    152.79 MB
    Quote Originally Posted by 4bee View Post
    Do CODAN not exist any more they were a local Co. in SA?
    Dunno, but I hav one of their radios as well. Little later model, a NGT AR 2011. Also discontinued.

    EDIT: Codan still exists.
    ​JayTee

    Nullus Anxietus

    Cancer is gender blind.

    2000 D2 TD5 Auto: Tins
    1994 D1 300TDi Manual: Dave
    1980 SIII Petrol Tray: Doris
    OKApotamus #74
    Nanocom, D2 TD5 only.

  2. #22
    Join Date
    Jun 2008
    Location
    Drouin East, Vic
    Posts
    2,781
    Total Downloaded
    0
    I've found a dealer in Renmark who is willing to perform the task for us when we pass through on our trip. Fingers crossed.

  3. #23
    Join Date
    Jan 1970
    Location
    Adelaide Hills. South Australia
    Posts
    13,349
    Total Downloaded
    0
    Quote Originally Posted by Tins View Post
    Dunno, but I hav one of their radios as well. Little later model, a NGT AR 2011. Also discontinued.

    EDIT: Codan still exists.
    Then I would expect someone inside the organisation would be able to use few quid or am I living in cloud cuckoo Land? Eeeeerrr, Service Dept. perchance????

  4. #24
    Join Date
    Sep 2010
    Location
    The Hills.
    Posts
    19,175
    Total Downloaded
    152.79 MB
    Quote Originally Posted by POD View Post
    I've found a dealer in Renmark who is willing to perform the task for us when we pass through on our trip. Fingers crossed.
    Good luck with it. I'm struggling getting the XP software to run.
    ​JayTee

    Nullus Anxietus

    Cancer is gender blind.

    2000 D2 TD5 Auto: Tins
    1994 D1 300TDi Manual: Dave
    1980 SIII Petrol Tray: Doris
    OKApotamus #74
    Nanocom, D2 TD5 only.

  5. #25
    Join Date
    Jun 2008
    Location
    Drouin East, Vic
    Posts
    2,781
    Total Downloaded
    0
    Had an interesting time with the bloke in Renmark. I installed the 9323 radio and remote head and 9350 antenna that I had acquired from a FB seller before we left home, I also took my old radio and the new cables just in case. He used an ancient laptop to run the XP program and was able to install my desired frequency profile and selcall ID into the radio that I bought off FB, however the radio would not transmit at all. Tried 3 mics- my new one, my old one, one of his- no response at all to the PTT. He got out a radio of his and we tried that; looked like I was going to be buying a radio from him. He went through the process of programming that one; we then found that it would not drive the auto-tune at all. Tune fail and no whirring from the 9350. We tried my old radio (an A series) with his remote head (a D series) which surprisingly played nicely together, tuned the antenna and transmitted properly. So I ended up buying the control head from him, reinstalling my original main unit, running the antenna that I bought from the FB seller, I left the FB radio with him rather than carry it as ballast but hung onto the FB control head (which won't talk to my radio but at least has intact screen etc).
    I've got my old 9350 antenna that does not function since the water event prompted a thousand tune cycles; I stripped it down and the runner thing is right at the top of it's travel. I'll have a play with it as time permits and see if I can resurrect it.

Page 3 of 3 FirstFirst 123

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!