Results 1 to 6 of 6

Thread: Screw needed!

  1. #1
    Join Date
    May 2003
    Location
    On The Road
    Posts
    30,032
    Total Downloaded
    0

    Screw needed!

    well, actually I need 16
    This QNAP (TS 439 Pro II) I happened across has empty HDD trays, unbelievable huh.

    The pic shows the normal PC screw first and third and the countersunk screw second and forth,,
    BUT!
    the head of the countersunk shown here is too WIDE!
    When bolted up it sits proud of the tray and stops insertion into the machine.
    The one in the tray was just luck!

    Anyone have any stored away?
    Attached Images Attached Images
    "How long since you've visited The Good Oil?"

    '93 V8 Rossi
    '97 to '07. sold.
    '01 V8 D2
    '06 to 10. written off.
    '03 4.6 V8 HSE D2a with Tornado ECM
    '10 to '21
    '16.5 RRS SDV8
    '21 to Infinity and Beyond!


    1988 Isuzu Bus. V10 15L NA Diesel
    Home is where you park it..

    [IMG][/IMG]

  2. #2
    Join Date
    Apr 2002
    Location
    Godwin Beach 4511
    Posts
    20,694
    Total Downloaded
    32.38 MB
    so it takes 2.5" hdds by the looks of it?

    if so, i'll have some here i would imagine from wrecked notebooks..
    2007 Discovery 3 SE7 TDV6 2.7
    2012 SZ Territory TX 2.7 TDCi

    "Make the lie big, make it simple, keep saying it, and eventually they will believe it." -- a warning from Adolf Hitler
    "If you don't have a sense of humour, you probably don't have any sense at all!" -- a wise observation by someone else
    'If everyone colludes in believing that war is the norm, nobody will recognize the imperative of peace." -- Anne Deveson
    “What you leave behind is not what is engraved in stone monuments, but what is woven into the lives of others.” - Pericles
    "We can ignore reality, but we cannot ignore the consequences of ignoring reality.” – Ayn Rand
    "The happiness of your life depends upon the quality of your thoughts." Marcus Aurelius

  3. #3
    Join Date
    Apr 2016
    Location
    Melbourne
    Posts
    4,533
    Total Downloaded
    0
    Quote Originally Posted by incisor View Post
    so it takes 2.5" hdds by the looks of it?

    ...
    Either 2.5's or 3.5's.
    Looks like Pedro is using 3.5's.

    Sorry Pedro, I have none(or maybe one single solitary screw.
    They just use any normal countersunk HDD screw. I think they should be M3 x 4mm.
    They aren't any special or particular type
    (unlike this annoying USB enclosure I have that's about to get chucked).

    EDIT: ps. I just bought a pack of 25(I need some too) off ebay for $2. In my search, I found none available locally in Aus, so just went with the cheapest from China(I'm in no rush).
    Just do a search(on ebay) for "countersunk hard drive screw" and you'll get a million and two hits, and they all generally say hard drive caddy screw(which is what you want).

  4. #4
    Join Date
    May 2003
    Location
    On The Road
    Posts
    30,032
    Total Downloaded
    0
    yes Inc,, the screws holding the side brackets are the correct thread,, but just not enough of it-- something strips before it gets anywhere near tight--
    I can buy them from QNAP,,
    bag of 96 for $32 plus freight--
    "How long since you've visited The Good Oil?"

    '93 V8 Rossi
    '97 to '07. sold.
    '01 V8 D2
    '06 to 10. written off.
    '03 4.6 V8 HSE D2a with Tornado ECM
    '10 to '21
    '16.5 RRS SDV8
    '21 to Infinity and Beyond!


    1988 Isuzu Bus. V10 15L NA Diesel
    Home is where you park it..

    [IMG][/IMG]

  5. #5
    Join Date
    May 2003
    Location
    On The Road
    Posts
    30,032
    Total Downloaded
    0
    I wonder what the ramifications are of countersinking the hole bigger??

    "How long since you've visited The Good Oil?"

    '93 V8 Rossi
    '97 to '07. sold.
    '01 V8 D2
    '06 to 10. written off.
    '03 4.6 V8 HSE D2a with Tornado ECM
    '10 to '21
    '16.5 RRS SDV8
    '21 to Infinity and Beyond!


    1988 Isuzu Bus. V10 15L NA Diesel
    Home is where you park it..

    [IMG][/IMG]

  6. #6
    Join Date
    Apr 2002
    Location
    Godwin Beach 4511
    Posts
    20,694
    Total Downloaded
    32.38 MB
    if it were me i would be filing the heads down..

    not as if they have to be tensioned to 200ftlb
    2007 Discovery 3 SE7 TDV6 2.7
    2012 SZ Territory TX 2.7 TDCi

    "Make the lie big, make it simple, keep saying it, and eventually they will believe it." -- a warning from Adolf Hitler
    "If you don't have a sense of humour, you probably don't have any sense at all!" -- a wise observation by someone else
    'If everyone colludes in believing that war is the norm, nobody will recognize the imperative of peace." -- Anne Deveson
    “What you leave behind is not what is engraved in stone monuments, but what is woven into the lives of others.” - Pericles
    "We can ignore reality, but we cannot ignore the consequences of ignoring reality.” – Ayn Rand
    "The happiness of your life depends upon the quality of your thoughts." Marcus Aurelius

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!