Printable View
I use ABS. A bit stronger than PLA. It's not rated as UV stable but I've never had a problem with it. I like it as its very easy to repair using acetone as a solvent.Quote:
Originally Posted by loanrangie
I tried PETG but there was no way I could get it to adhere to the print bed. Went back to ABS as it sticks so well using a ABS slurry brushed on to glass.
Is anyone making seatbox corners?
I would be interested in buying some.
https://uploads.tapatalk-cdn.com/202...2e873ff680.png
Levelling the bed…Quote:
Originally Posted by loanrangie
Outdoors in the sun you’ll be better off with abs but you will need to manage the fumes
Watch some of the assembly videos on YouTube so you go about putting it together so it is somewhat reliable…
Send me some detailed measurements [emoji51]Quote:
Originally Posted by travelrover
Just watched a few including some of the upgrades/mods you can do.Quote:
Originally Posted by incisor
get used to the machine first before doing mods..Quote:
Originally Posted by loanrangie
getting the rollers correctly set and the frame square at the start really makes life down the track much easier
i have a now heavily modified 3pro and its a great machine if you put in the time keeping things level etc
the more expensive machines need less tender loving care but the ender can produce what they do if you take the time to set them up properly
chep is pretty good on most things
Creality Ender 3 Assembly Guide For Beginners - YouTube
enjoy!
Does the 3 pro come with the silent stepper motor boards?Quote:
Originally Posted by loanrangie
Dave what are your thoughts on the 3 pro vs 3 V2?Quote:
Originally Posted by incisor
The 3v2 has most of the goodies that you add to the pro so if your not going to be a tinkerer
Go the 3pro if you intend to fiddle and play with software etc
Some do and some don’t it seemsQuote:
Originally Posted by Disco-tastic
I put an upgraded board in mine as I went dual z and the std boards don’t do that well